Items where Division is "Mechanical and Industrial Engineering" and Year is 2005

A

Ahari, Mehrad (2005) Design optimization of an adaptive laminated composite beam with piezoelectric actuators. Masters thesis, Concordia University.

Akhlaque-E-Rasul, Shaikh Mohammad (2005) Buckling analysis of tapered composite plates using ritz method based on classical and higher order theories. Masters thesis, Concordia University.

Al Shakhshir, Saher (2005) A computational thermodynamic model of the Mg-Al-Y system. Masters thesis, Concordia University.

Aldien, Yasser Saed (2005) A study of hand-handle interactions and hand-arm biodynamic response to vibration. PhD thesis, Concordia University.

Anwar, Ifthekhar (2005) Automotive collision detection system utilizing distributed polyvinylidene fluoride sensors. Masters thesis, Concordia University.

Arshad, Wasim (2005) Static and buckling analyses of curved metallic and composite beams using hierarchical FEM. Masters thesis, Concordia University.

Aurelio., Domínguez-González (2005) Design optimization and vibration control of adaptive structures. PhD thesis, Concordia University.

B

Bajic, Marko (2005) Dynamic interactions between bicycles and rumble strips. Masters thesis, Concordia University.

C

Cai, Hua (2005) Incorporating quantified mental workload in modeling of driver's handling behavior /cHua Cai. Masters thesis, Concordia University.

Cai, Wei (2005) A generic, geometric approach to accurate machining-error predictions for 3-axis CNC milling of sulptured surface parts. Masters thesis, Concordia University.

D

Deodhar, Aniket (2005) Ride dynamic response of commercial vehicles subjected to wheel unbalance and non-uniformity effects. Masters thesis, Concordia University.

Devu, Venkata Sundar Kamal (2005) Modelling a closed-loop product recovery system with supply uncertainty. Masters thesis, Concordia University.

F

Fatseyeu, Arkadz (2005) Determination of properties of viscoelastic materials by nanoindentation. Masters thesis, Concordia University.

Fu, Tianjun (2005) Speed-sensorless torque control of induction motors for hybrid electric vehicles. Masters thesis, Concordia University.

G

Gholami, Behnood (2005) Receding horizon control of uncertain systems. Masters thesis, Concordia University.

Guo, Xuan Ning (2005) Experimental investigation, stochastic modelling and reliability analysis of fatigue behavior of tapered composite laminates. Masters thesis, Concordia University.

H

He, Da-Gang (2005) Permanent magnet plunger bi-directional solenoid actuator for direct alternative fuel injector. Masters thesis, Concordia University.

Huang, Li Ju (2005) System design and analysis using simulation for hybrid cellular manufacturing systems in labor-intensive industry. Masters thesis, Concordia University.

I

Ibrahim, Md (2005) Effect of notch size on the reliability of composite laminates based on stochastic finite element analysis and experimental investigation. Masters thesis, Concordia University.

Islam, A. S. M. Shawkatul (2005) A comparative study of advanced suspension dampers for vibration and shock isolation performance. Masters thesis, Concordia University.

Islam, Farhana and Medraj, Mamoun (2005) Thermodynamic Modelling of the Mg-Al-Ca System. Canadian Metallurgical Quarterly, 44 (3). pp. 523-535. ISSN 0008-4433

K

Komanduri, Vishnuvardhan Nagarajan (2005) Dynamic behavior of drill-shaft-drive assembly subjected to cutting loads. Masters thesis, Concordia University.

L

Laberge-Lebel, Louis (2005) Manufacturing of braided thermoplastic composites with commingled fibers. Masters thesis, Concordia University.

Liegl, Robert Mihael (2005) A full potential solver for lifting flows on unstructured tetrahedral meshes. Masters thesis, Concordia University.

Lin, Bingxiong (2005) Optimal tank geometry and braking and steering response analysis of a tank vehicle. Masters thesis, Concordia University.

Liu, Wei Ping (2005) Epoxy-clay nanocomposites for structural applications. PhD thesis, Concordia University.

Liu, Weiguang (2005) Dynamic instability analysis of tapered composite plates using Ritz and finite element methods. Masters thesis, Concordia University.

Loya, Virendra (2005) The effect of microstructure on the permeability of metal foams. Masters thesis, Concordia University.

M

Mandapuram, Santosh Chary (2005) Role of seat design factors and biodynamic characterization of seated occupants under horizontal vibration. Masters thesis, Concordia University.

Mansour, Tarek (2005) Implicit geometric representation of gas turbine blades for optimal shape design. Masters thesis, Concordia University.

May, David (2005) Wing tip vortex dependence with angle of attack. Masters thesis, Concordia University.

Mehdizadeh, Omid Z. and Paraschivoiu, Marius (2005) A three-dimensional finite element approach for predicting the transmission loss in mufflers and silencers with no mean flow. Applied Acoustics, 66 (8). pp. 902-918. ISSN 0003-682X

Mengistu, Temesgen Teklemariam (2005) Aerodynamic design and optimization of turbomachinery blading. PhD thesis, Concordia University.

Mohamed, Kaveh and Paraschivoiu, Marius (2005) Real gas simulation of hydrogen release from a high-pressure chamber. International Journal of Hydrogen Energy, 30 (8). pp. 903-912. ISSN 0360-3199

Murad Musa., Al-Shibli (2005) Modeling and control of a free-flying space robot interacting with a target satellite. PhD thesis, Concordia University.

N

Nemani, LakshmiNarayana Naga (2005) Vibration analysis of a hand-grinder system under wheel unbalance excitation. Masters thesis, Concordia University.

P

Pakmehr, Mehrdad (2005) Dynamic modelling and nonlinear control of vortex-coupled delta wing systems. Masters thesis, Concordia University.

Parvate-Patil, Girish (2005) Solenoid operated variable valve timing for internal combustion engines. Masters thesis, Concordia University.

Pedrami, Reza (2005) Hybrid modelling and simulation of rigid bodies in contact. Masters thesis, Concordia University.

Peña Coronel, José Marco Antonio (2005) Biodynamic characterization of seated occupant under horizontal vibration /cJosé Marco Antonio Peña Coronel. Masters thesis, Concordia University.

R

Ren, Zhi Qian (2005) A dynamic simplex approach for optimization of real-time distributed multi-body simulations. Masters thesis, Concordia University.

S

Sabour, Mohammad Hossein (2005) Creep-fatigue interaction in aircraft gas turbine components by simulation and testing at scaled temperatures. PhD thesis, Concordia University.

Salek, Mohammed Hasan (2005) Effect of processing parameters on the mechanical properties of Carbon/PEKK thermoplastic composite materials. Masters thesis, Concordia University.

Sandhu, Amandeep Singh (2005) A robust production system design using robust engineering methodology. Masters thesis, Concordia University.

Singh, Amritsar Jeetender (2005) Micro systems for bio-enzymatic reaction detection. Masters thesis, Concordia University.

T

Tarczay, Anthony (2005) Study of distributed occupant-seat interactions as an objective measure of seating comfort. Masters thesis, Concordia University.

Theodorescu, Liviu (2005) Study of dynamic cavitation in variable displacement axial piston pumps. Masters thesis, Concordia University.

W

Wang, En Rong (2005) Syntheses and analyses of semi-active control algorithms for a magneto-rheological damper for vehicle suspensions. PhD thesis, Concordia University.

Wang, Xiao Zhao (2005) Experimental investigation of the Mg-Al-Ca ternary phase diagram. Masters thesis, Concordia University.

X

Xu, Shijie (2005) Modeling and parametric analysis of micro thermal actuators. Masters thesis, Concordia University.

Xu, Wensheng (2005) Effect of local material properties on tapping mode atomic force microscopy. Masters thesis, Concordia University.

Y

Yang, Feng (2005) On the estimation of center of gravity height of arbitrarily loaded articulated freight vehicle. Masters thesis, Concordia University.

Yang, Ming (2005) Linear parameter-varying sliding mode control of state delayed systems with application to delta wing vortex coupled dynamics. Masters thesis, Concordia University.

Yu, Hang (2005) Free form sketching system for product design using virtual reality technology. Masters thesis, Concordia University.

Yue, Wei (2005) Modelling and piecewise-affine control of an aerobatic helicopter. Masters thesis, Concordia University.

Z

Zhang, Huainan (2005) Biodynamic response and body interactions with the seat pan and the back rest under vertical vibration. Masters thesis, Concordia University.

Zhang, Li (2005) Solving railway routing and scheduling problems in an intermodal freight transportation system. Masters thesis, Concordia University.

Zheng, Tinghui (2005) The effects of vortex profile on sound generation and propagation in non-uniform flows. PhD thesis, Concordia University.

Zhirafar, Saeed (2005) Effect of cryogenic treatment on the mechanical properties of steel and aluminum alloys. Masters thesis, Concordia University.