Login | Register

Items where Division is "Mechanical and Industrial Engineering" and Year is 2012

Group by: Authors | Item Type | No Grouping
Number of items: 64.

Article

Ait Abderrahmane, Hamid, Païdoussis, Michael P., Fayed, Mohamed and Ng, Hoi Dick (2012) Nonlinear dynamics of silk and Mylar flags flapping in axial flow. Journal of Wind Engineering and Industrial Aerodynamics, 107-10 . pp. 225-236. ISSN 01676105

Alsawafta, M., Badilescu, S., Truong, Vo-Van ORCID: https://orcid.org/0000-0003-3535-3749 and Packirisamy, Muthukumaran (2012) The effect of hydrogen nanobubbles on the morphology of gold–gelatin bionanocomposite films and their optical properties. Nanotechnology, 23 (6). ISSN 0957-4484

Chtchetinina, Anna and Ng, Hoi Dick (2012) Imploding water wave: A poppy blossom. Physics of Fluids, 24 (9). 091113. ISSN 10706631

Dong, Ren G., Welcome, Daniel E., Xu, Xueyan S., Warren, Christopher, McDowell, Thomas W., Wu, John Z. and Rakheja, Subhash (2012) Mechanical impedances distributed at the fingers and palm of the human hand in three orthogonal directions. Journal of Sound and Vibration, 331 (5). pp. 1191-1206. ISSN 0022460X

Eaton, R., Zhang, B., Bergthorson, J. M. and Ng, Hoi Dick (2012) Measurement and chemical kinetic model predictions of detonation cell size in methanol–oxygen mixtures. Shock Waves, 22 (2). pp. 173-178. ISSN 0938-1287

Garcia, Julio, Marrufo, Oscar R, Rodriguez, Alfredo O, Larose, Eric, Pibarot, Philippe and Kadem, Lyes (2012) Cardiovascular magnetic resonance evaluation of aortic stenosis severity using single plane measurement of effective orifice area. Journal of Cardiovascular Magnetic Resonance, 14 (1). p. 23. ISSN 1532-429X

Kalantari, Masoud, Dargahi, Javad, Kövecses, Jozsef, Mardasi, Mahmood Ghanbari and Nouri, Shahrzad (2012) A New Approach for Modeling Piezoresistive Force Sensors Based on Semiconductive Polymer Composites. IEEE/ASME Transactions on Mechatronics, 17 (3). pp. 572-581. ISSN 1083-4435

Khaksarfard, Reza and Paraschivoiu, Marius (2012) Numerical simulation of high pressure hydrogen release through an expanding opening. International Journal of Hydrogen Energy, 37 (10). pp. 8734-8743. ISSN 03603199

Mandour, A, Fayed, Mohamed, Ait Abderrahmane, Hamid, Ng, Hoi Dick, Kadem, Lyes and Vatistas, Georgios H. (2012) Symmetry-Breaking of Interfacial Polygonal Patterns and Synchronization of Travelling Waves within a Hollow-Core Vortex. Chaotic Modeling and Simulation . pp. 257-271. ISSN 2241-0503

Palmisano, R. and Ng, Hoi Dick (2012) Design analysis and comparison between standard and rotary porting systems for IC engine. International Journal of Automotive Technology, 13 (2). pp. 175-191. ISSN 1229-9138

Zhang, B., Ng, H. D. and Lee, J. H. S. (2012) Measurement of effective blast energy for direct initiation of spherical gaseous detonations from high-voltage spark discharge. Shock Waves, 22 (1). pp. 1-7. ISSN 0938-1287

Zhang, B., Ng, Hoi Dick and Lee, J. H. S. (2012) Measurement and scaling analysis of critical energy for direct initiation of gaseous detonations. Shock Waves, 22 (3). pp. 275-279. ISSN 0938-1287

Zhang, Bo, Ng, Hoi Dick and Lee, John H.S. (2012) The critical tube diameter and critical energy for direct initiation of detonation in C2H2/N2O/Ar mixtures. Combustion and Flame, 159 (9). pp. 2944-2953. ISSN 00102180

Book Section

Bhuiyan, Nadia (2012) Numerical Evaluation of Product Development Processes. In: Miidla, Peep, (ed.) Numerical Modelling. InTech. ISBN 978-953-51-0219-9

Thesis

Abdelsalam, Ossama Ramy (2012) Analysis and Optimization of Autofrettaged and Shrink-Fitted Compound Cylinders under Thermo-Mechanical Loads. PhD thesis, Concordia University.

Abdolhosseini, Mahyar (2012) Model Predictive Control of an Unmanned Quadrotor Helicopter: Theory and Flight Tests. Masters thesis, Concordia University.

Acevedo, Andres (2012) Production Planning with Raw Material Shelf-Life Considerations by Mixed Integer Programming. Masters thesis, Concordia University.

Ahmadi, Roozbeh (2012) Optical Microsystems for Static and Dynamic Tactile Sensing: Design, Modeling, Fabrication and Testing. PhD thesis, Concordia University.

Al Salem, Aqeel Asaad (2012) An Integrated Model for Supplier Quality Evaluation. Masters thesis, Concordia University.

Amoozgar, M. Hadi (2012) Development of Fault Diagnosis and Fault Tolerant Control Algorithms with Application to Unmanned Systems. Masters thesis, Concordia University.

Arabnia, Mohammad (2012) Aerodynamic Shape Optimization of Axial Turbines in Three Dimensional Flow. PhD thesis, Concordia University.

Arbabi, Araz (2012) Aerodynamic Inverse Shape Design of Compressor and Turbine Stages Using ANSYS-CFX. Masters thesis, Concordia University.

Ashtaputre, Pranav (2012) Dynamic behavior of microcantilevers subjected to fluid-structure interaction using mode-summation method. Masters thesis, Concordia University.

Atieh, Ahmad (2012) Design, Modeling, Fabrication and Testing of a Piezoresistive-Based Tactile Sensor for Minimally Invasive Surgery Applications. Masters thesis, Concordia University.

Badagi, Vijay Kumar (2012) Dynamic response of width- and thickness-tapered composite beams using Rayleigh-Ritz method and modal testing. Masters thesis, Concordia University.

Cai, Xiao (2012) Determination of Process Parameters for the Manufacturing of Thermoplastic Composite Cones Using Automated Fiber Placement. Masters thesis, Concordia University.

Cook, Kristina J. (2012) Experimental and Numerical Investigation of Mass Transfer in Passive Scaled-up Micromixers. Masters thesis, Concordia University.

Ghorbani, Zahra (2012) A Study on Gas Evolving Electrodes under Extreme Current Densities. Masters thesis, Concordia University.

Graham, Percival (2012) Droplet Coalescence on Surfaces of Various Wettabilities. Masters thesis, Concordia University.

Krishnan, Harish (2012) Feasibility Study of Using PDMS as an Alternate Transmittance Cell Kit in an FTIR Spectrometer. Masters thesis, Concordia University.

Li, Jianxiong (2012) Inspection Plan for Dependent Multi-Characteristic Components with Multi-Classifications. Masters thesis, Concordia University.

Li, Yangtao (2012) Arc-Length Parameterized NURBS Tool Path Generation and Velocity Profile Planning for Accurate 3-Axis Curve Milling. Masters thesis, Concordia University.

Ling, Ling (2012) Numerical Investigation of the Cooling Performance of Microchannel Heat Sinks under Uniform and Non-Uniform Heating Conditions. Masters thesis, Concordia University.

Mandapuram, Santosh Chary (2012) Biodynamic Responses of the Seated Occupants to Multi-Axis Whole-Body Vibration. PhD thesis, Concordia University.

Mfoumou, Etienne Marcelin (2012) A noninvasive biomechanical characterization approach for application to cell physiology and developing organs. PhD thesis, Concordia University.

Mohammadi Farhangi, Mehran (2012) Numerical study of droplet coalescence and droplet shedding on surfaces with various wettabilities. Masters thesis, Concordia University.

Mohammadi, Farough (2012) Nonlinear vibration analysis and optimal damping design of sandwich cylindrical shells with viscoelastic and ER-fluid treatments. PhD thesis, Concordia University.

Mohiuddin, Mohammad (2012) Effect of Pressure and Temperature on Electrical Conductivity of CNT-PEEK Composites. PhD thesis, Concordia University.

Muia, Timothy (2012) A Comparative Study of Target Costing Methods. Masters thesis, Concordia University.

Nerguizian, Vahé (2012) Non-Destructive Bio-Assay of Single Living Cell. PhD thesis, Concordia University.

Omar, Rayan Saleem M (2012) Improving the Stability of Supply Chain Operations Planning Considering the Effects of Congestion. Masters thesis, Concordia University.

Othman, Mohammed (2012) Integrating Worker differences into Workforce Planning. PhD thesis, Concordia University.

Ozhikandathil, Jayan (2012) Microphotonics and Nanoislands Integrated Lab-on-Chips (LOCs) for the Detection of Growth Hormones in Milk. PhD thesis, Concordia University.

Pazooki, Alireza (2012) Ride and directional dynamic analysis of articulated frame steer vehicles. PhD thesis, Concordia University.

Rocher, Guy-Joël (2012) Hydrogen Storage Properties of Mg-Ni-H through Pressure Composition Isotherms Combined with Thermodynamic Calculations. Masters thesis, Concordia University.

Roman, Dacian Emilian (2012) Integrated micro-system for real time cell bio-chemical assessment. PhD thesis, Concordia University.

Rowghanian, Pooya (2012) Improvement of Temperature Distribution across Thick Thermoset Composites Using Carbon Nanotubes. Masters thesis, Concordia University.

Saeedi, Khodabakhsh (2012) Influence of Rotating Tire Dynamics on Vehicle System Vibrations. PhD thesis, Concordia University.

Salam, Adil (2012) Lean Accounting: Measuring Target Costs. PhD thesis, Concordia University.

Shadmehri, Farjad (2012) Buckling of Laminated Composite Conical Shells; Theory and Experiment. PhD thesis, Concordia University.

Shahmir, Arman (2012) Characterization of apparent mass of human body seated on rigid and elastic seats under vertical vibration. Masters thesis, Concordia University.

Sharifi, Shahram (2012) Operation-Level Sequence- Dependent Setup Time Reduction In Dynamic Cellular Manufacturing Systems. PhD thesis, Concordia University.

Shaverdi, Golnaz (2012) Developing a model for mass transfer in adsorption packed-bed filters. Masters thesis, Concordia University.

Tajaddod Alizadeh, Dorsa (2012) The Role of Individuals in Innovation Networks: A Simulation Approach in Canadian Biotechnology Network. Masters thesis, Concordia University.

Tong, Ruoshi (2012) Cost Analysis on L-shape Composite Componenet Manufacturing. Masters thesis, Concordia University.

Uzzal, Md. Rajib Ul Alam (2012) Analysis of a Three-Dimensional Railway Vehicle-Track System and Development of a Smart Wheelset. PhD thesis, Concordia University.

Wang, Tao (2012) Sliding Mode Fault Tolerant Reconfigurable Control against Aircraft Control Surface Failures. PhD thesis, Concordia University.

Wasif, Muhammad (2012) A new approach to CNC programming for accurate multi-axis face-milling of hypoid gears. PhD thesis, Concordia University.

Xie, Shuangxi (2012) An Accurate Approach to Modeling the Genuine Tooth Surfaces of the Face-Milled Spiral Bevel and Hypoid Gears. PhD thesis, Concordia University.

You, Jianliang (2012) Compliant Torsional Micromirrors with Electrostatic Actuation. PhD thesis, Concordia University.

Zhao, Yimin (2012) Visual Servoing For Robotic Positioning And Tracking Systems. PhD thesis, Concordia University.

Zhao, Yimin (2012) Visual Servoing For Robotic Positioning And Tracking Systems. PhD thesis, Concordia University.

Zheng, Jiannan (2012) Image Processing and Classification Applications in Aerospace NDT and Honey Bee Health Monitoring. Masters thesis, Concordia University.

vahidian, naghmeh (2012) Comparison of Deterministic and Stochastic Production Planning Approaches in Sawmills by Integrating Design of Experiments and Monte- Carlo simulation. Masters thesis, Concordia University.

This list was generated on Sun Oct 13 03:02:25 2024 EDT.
Back to top Back to top