Items where Division is "Mechanical and Industrial Engineering" and Year is 2013

Abdelkhalek, Sherif Mahmoud Mohamed (2013) A New Approach to CNC Programming of Plunge Milling. PhD thesis, Concordia University.

Ahmadi, Pooya (2013) Computational Study of the Vertical Axis Wind Turbines: Wake Dynamics and Generated Torque. Masters thesis, Concordia University.

Ahmed, Aqeel (2013) New Approaches to Determining Shortest Cutters and Work Piece Setups without Over-travel for 5-axis CNC Machining. PhD thesis, Concordia University.

Ahmed, Mohamed Ibrahim Elgeuchy M. S. (2013) Bending behaviour of thick-walled composite tubes. PhD thesis, Concordia University.

Ait Abderrahmane, Hamid, Fayed, Mohamed, Ng, Hoi Dick and Vatistas, Georgios H. (2013) A note on relative equilibria in a rotating shallow water layer. Journal of Fluid Mechanics, 724 . pp. 695-703. ISSN 0022-1120

Al Muslmani, Majed (2013) Rotordynamic Analysis of Tapered Composite Driveshaft Using Conventional and Hierarchical Finite Element Formulations. Masters thesis, Concordia University.

Aljanaideh, Omar (2013) Modeling and Compensation of Rate-Dependent Asymmetric Hysteresis Nonlinearities of Magnetostrictive Actuators. PhD thesis, Concordia University.

Aljanaideh, Omar (2013) Modeling and Compensation of Rate-Dependent Asymmetric Hysteresis Nonlinearities of Magnetostrictive Actuators. PhD thesis, Concordia University.

Aljuneidi, Tariq (2013) A Mathematical Approach to the Design of Cellular Manufacturing System Considering Dynamic Production Planning and Worker Assignments. Masters thesis, Concordia University.

Atia, Ahmed (2013) Parameter Identification of Biomechanical Model Using Measured Vibration Response to Walking Generated Excitations with Optimization. Masters thesis, Concordia University.

Bhatia, Manjot Singh (2013) Assessing the Impact of Quality Management Systems on Business Performance. Masters thesis, Concordia University.

Bzeih, Wasef (2013) The Effects of Molecular Weight Variation of Polystyrene on its SFG spectra. Masters thesis, Concordia University.

Chaeichian, Sina (2013) A novel thermoplastic/clay/thermoset hybrid system for toughening of unsaturated polyesters. PhD thesis, Concordia University.

Ebrahim nataj jelodar, Hamzeh (2013) Viscous Stability Analysis of Trailing Line Vortex. Masters thesis, Concordia University.

Fan, Yan Feng (2013) Experimental Investigations of Flow Boiling Heat Transfer and Flow Instability in a Horizontal Microtube with an Inlet Orifice. PhD thesis, Concordia University.

Farshchi Tabrizi, Hamed (2013) Experimental characterization of effervescent atomization. Masters thesis, Concordia University.

Farvardin, Ehsan (2013) Biodiesel Spray Characterization: A Combined Numerical and Experimental Analysis. PhD thesis, Concordia University.

Fazili, Mohammad Amin (2013) Vibration Analysis of Thickness- and Width-Tapered Laminated Composite Beams using Hierarchical Finite Element Method. Masters thesis, Concordia University.

Hassan, Othman (2013) Thermal and Flow Field Investigations of a Micro-Tangential-Jet Film Cooling Scheme on Gas Turbine Components. PhD thesis, Concordia University.

Hosseini Rooteh, Ensieh Sadat (2013) Tool wear monitoring for face milling process with intelligent algorithms. Masters thesis, Concordia University.

Hosseini, Seyed Babak (2013) A Lagrangean Relaxation Approach for the Modular Hub Location Problem. Masters thesis, Concordia University.

Islam, Md. Mezbahul (2013) Thermodynamic Modeling and Experimental Investigation of the Mg-Cu-Ni-Y Quaternary System. PhD thesis, Concordia University.

Jalali, Mohsen (2013) Improving Electromagnetic Shielding with Metallic Nanoparticles. PhD thesis, Concordia University.

Jeyhani, Morteza (2013) Left Ventricular Flow Patterns after Percutaneous Edge-to-Edge Mitral Valve Repair: An in vitro Study. Masters thesis, Concordia University.

Kalantari, Masoud (2013) Development of Piezoresistive Tactile Sensors and a Graphical Display System for Minimally Invasive Surgery and Robotics. PhD thesis, Concordia University.

Karimi, Elnaz (2013) Exploring the effect of individual protective behaviors on influenza transmission, using an agent based model. Masters thesis, Concordia University.

Khajavi Bajestani, Amir (2013) A Bi-Objective Tactical Planning Model for the Reverse Supply Chain of Durable Products. Masters thesis, Concordia University.

Khan, Md. Imran (2013) Influence of cooling rate on microsegregation behavior of magnesium alloys. Masters thesis, Concordia University.

Konica, Shabnam (2013) Experimental Investigation of the Al-Ca-Zn system. Masters thesis, Concordia University.

Kozlick, Stuart Brahm (2013) Effect of Cryogenic Treatment on the Mechanical Properties of Nickel-Titanium Shape Memory Alloys. Masters thesis, Concordia University.

Le, Thanh Phuc (2013) A driver-vehicle model for impaired motorists and strategies for planning autonomous vehicles. PhD thesis, Concordia University.

Lee, John H.S., Jesuthasan, Anne and Ng, Hoi Dick (2013) Near limit behavior of the detonation velocity. Proceedings of the Combustion Institute, 34 (2). pp. 1957-1963. ISSN 15407489

Madhok, Kulbir Singh (2013) Comparative characterization of Out-of-Autoclave Materials made by Automated Fiber Placement and Hand-Lay-Up Processes. Masters thesis, Concordia University.

Maryam, Rahbari (2013) A Bi-Objective Integrated Reverse Supply Chain Design for Durable Products. Masters thesis, Concordia University.

Minukhin, Igor (2013) An Improved Method of Cutting Forces Prediction for the Primary Cutting Edges of Twist Drills. Masters thesis, Concordia University.

Mirzaghafour, Faezeh Sadat (2013) Modular Hub Location Problems. Masters thesis, Concordia University.

Moeini, Golbarg (2013) En-Route Flight Planning: A Mathematical Modeling Approach for Operating Cost Minimization, Dynamic Speed Control and Mid-air Collision Avoidance. Masters thesis, Concordia University.

Mohebbi, Abolfazl (2013) Real-Time Stereo Visual Servoing of a 6-DOF Robot for Tracking and Grasping Moving Objects. Masters thesis, Concordia University.

Naghib Zadeh, Saman (2013) Mesh Requirement Investigation for 2D and 3D Aerodynamic Simulation of Vertical Axis Wind Turbines. Masters thesis, Concordia University.

Nakayama, Haruka (2013) Application of Dynamic Mesh Method in CFD to Engineering Designs of Needle-Free Liquid Jet Injector and Diaphragm-less Shock Tube. Masters thesis, Concordia University.

Nakhle, Wissam (2013) On the Effect of Variable Opening Geometries, and Operating Conditions on High Pressure Hydrogen Releases: Ignition Risks. Masters thesis, Concordia University.

Niroomand, Iman (2013) Effect of Reconfiguration Characteristics on Manufacturing System Capacity Selection. PhD thesis, Concordia University.

Nouri, Shahrzad (2013) Experimental Methods for the Assessment of Single Living Cells:Dielectrophoresis for Cell Electro-Deformations. Masters thesis, Concordia University.

Portaro, Rocco (2013) Air-Powered Liquid Needle Free Injectors: Design, Modeling and Experimental Validation. Masters thesis, Concordia University.

Rodriguez, Jonathan (2013) Improving Patient Flow with Lean Methodology: A Case Study at the Montreal General Hospital Colorectal Department. Masters thesis, Concordia University.

SadAbadi, Hamid (2013) Nano-integrated Polymeric Suspended Microfluidic Platform for Ultra-Sensitive Bio-Molecular Recognition. PhD thesis, Concordia University.

Saffari Farsani, Mahdi (2013) Structural Health Monitoring of Truss Structures Using Statistical Approach. Masters thesis, Concordia University.

Salajegheh, Pooya (2013) Vibrations of Thickness-and-width Tapered Laminated Composite Beams with Rigid and Elastic Supports. Masters thesis, Concordia University.

Sanati Nezhad, Amir (2013) Lab-On-Chip for Ex-Vivo Study of Bio-Mechanical-Chemical Behavior of Tip Growing Plant Cells. PhD thesis, Concordia University.

Shishehgaran, Nasim (2013) Numerical Simulation of High Pressure Hydrogen Releases into Air through Varying Orifice Geometries. Masters thesis, Concordia University.

Stoenescu, Stefan (2013) Optical Characterization of Plasmonic Anisotropic Nanostructures by Modeling and Spectroscopic Verification. PhD thesis, Concordia University.

Wang, Tian (2013) Experimental investigation of the Al-Mn-Zn system through diffusion couples and key samples coupled with thermodynamic modeling. Masters thesis, Concordia University.

Wu, Bai Rong (2013) Condition based maintenance optimization using data driven methods. PhD thesis, Concordia University.

Wu, Lan (2013) Bio-Signal Based Human-Computer Interface for Geometric Modeling. PhD thesis, Concordia University.

Yan, Baiquan (2013) A Systematic Study of Design Conflict: Modeling, Representation, Resolution, and Application. PhD thesis, Concordia University.

Zeinoun, Gabriel (2013) Optimization of a Reconfigurable Manipulator with Lockable Cylindrical Joints. Masters thesis, Concordia University.

Zhang, Bo, Ng, Hoi Dick and Lee, John H.S. (2013) Measurement and relationship between critical tube diameter and critical energy for direct blast initiation of gaseous detonations. Journal of Loss Prevention in the Process Industries, 26 (6). pp. 1293-1299. ISSN 09504230

Zhang, Yinan, Cao, Xinjin, Wanjara, Priti and Medraj, Mamoun (2013) Fiber Laser Deposition of Inconel 718 Using Powders. In: Advanced Materials, Processes and Applications for Additive Manufacturing Symposium, Materials Science and Technology.

Zheng, Yingjie (2013) A Flow Field Study of a Film Cooling Hole Featuring an Orifice. Masters thesis, Concordia University.