Login | Register

Items where Division is "Mechanical and Industrial Engineering" and Year is 2016

Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | J | K | L | M | N | O | R | S | V | X | Y | Z
Number of items: 67.

A

Abdessameud, Saida (2016) Thermodynamic Modeling of the Mg-Al-Li-Na-H System for Solid State Hydrogen Storage Applications. PhD thesis, Concordia University.

Abedi, Mehrnoosh (2016) Viscoelastic Characterization of Out-of-Autoclave Composite Laminates: Experimental and Finite Element Studies. Masters thesis, Concordia University.

Abulkhair, Hani (2016) Experimental Investigation of the Flow Dynamics in a Model of an Abdominal Aortic Aneurysm. PhD thesis, Concordia University.

Ali, Abdallah (2016) Design of an Exhaust Gas Energy Recovery System for Internal Combustion Engines. Masters thesis, Concordia University.

Alinia, Sahar (2016) REAL TIME POSE CONTROL OF PARALLEL ROBOT. Masters thesis, Concordia University.

Alizadeh, Dina (2016) Effect of Clay Addition on Mode II Interlaminar Fracture Toughness and Flexural Fatigue Behavior of Glass/Epoxy Composites. Masters thesis, Concordia University.

Arbatani, Siamak (2016) Identification of Mechanical Properties of Nonlinear Materials and Development of Tactile Displays for Robotic Assisted Surgery Applications. PhD thesis, Concordia University.

Azad, Mohammadreza (2016) Manufacturing of Sandwich Panels Using Recycled Thermoplastic Composites in a Continuous Extrusion Line. Masters thesis, Concordia University.

Azami, Aria (2016) Scheduling Hybrid Flow Lines of Aerospace Composite Manufacturing Systems. Masters thesis, Concordia University.

Aziz, Bishoy (2016) An experimental approach to measure the temperature of in-flight particles in suspension plasma spraying. Masters thesis, Concordia University.

B

Badihi, Hamed (2016) Monitoring, Diagnosis, and Fault-Tolerant Control of Wind Turbines. PhD thesis, Concordia University.

C

Caralapatti, Vinodh Krishna (2016) Analyzing the Effects of High Repetition Laser Shock Peening on Corrosion Resistance of Magnesium. Masters thesis, Concordia University.

Chang, Liyong (2016) A Parametric Design of Ball End Mill and Simulating Process. Masters thesis, Concordia University.

Charbonneau, Frédéric (2016) Improving the sparks assisted chemical engraving (SACE) for industrial application. Masters thesis, Concordia University.

D

Dehkhoda, Kiana (2016) Developing a framework on supply chain risk mapping, prioritization and engagement. Masters thesis, Concordia University.

Delvadiya, Chirag (2016) Dynamic analysis of tapered circular discs made of isotropic and orthotropic materials using Rayleigh-Ritz method and ANSYS. Masters thesis, Concordia University.

Dhulkhed, Shyam (2016) Exploring the Feasibility of High Repetition Laser Ultrasound Non-Destructive Examination of Carbon Fibre Reinforced Polymer Composites. Masters thesis, Concordia University.

F

Fanous, Michael (2016) Study on Optical Properties and Biocompatibility of Different Polymer-Gold Nano-Composite Platforms for Opto-Micro Fluidic Applications. Masters thesis, Concordia University.

Fu, Yu (2016) New Development on Sense and Avoid Strategies for Unmanned Aerial Vehicles. Masters thesis, Concordia University.

G

Gao, Y., Ng, H. D. and Lee, J. H. S. (2016) Near-limit propagation of gaseous detonations in narrow annular channels. Shock Waves . ISSN 0938-1287

Gao, Yuan, Zhang, Bo, Ng, Hoi Dick and Lee, John H.S. (2016) An experimental investigation of detonation limits in hydrogen–oxygen–argon mixtures. International Journal of Hydrogen Energy, 41 (14). pp. 6076-6083. ISSN 03603199

Ghamry, Khaled Ali Shaaban (2016) Cooperative Control of Multiple Unmanned Aerial Vehicles with Application to Forest Fire Detection and Fighting. PhD thesis, Concordia University.

Gharaaty, Sepehr (2016) Accuracy Enhancement of Industrial Robots by Dynamic Pose Correction. Masters thesis, Concordia University.

Gujba, Abdullahi Kachalla (2016) Influence of Mechanical Surface Treatments on the Water Droplet Erosion Performance of Ti-6Al-4V. PhD thesis, Concordia University.

H

Habibi, Mohsen (2016) Tool Wear Improvement and Machining Parameter Optimization in Non-generated Face-hobbing of Bevel Gears. PhD thesis, Concordia University.

Hajiloo, Amir (2016) Robust and Multi-Objective Model Predictive Control Design for Nonlinear Systems. PhD thesis, Concordia University.

Hamouda, Karim (2016) VIBRATION TRANSMISSION CHARACTERISTICS AND GRIP STRENGTH PRESERVATION OF ANTI-VIBRATION GLOVES. Masters thesis, Concordia University.

He, Jiaqing, Kokgil, Erdem, Wang, Liangzhu (Leon) and Ng, Hoi Dick (2016) Assessment of similarity relations using helium for prediction of hydrogen dispersion and safety in an enclosure. International Journal of Hydrogen Energy, 41 (34). pp. 15388-15398. ISSN 03603199

Hooshyar Telegraphi, Amirreza ORCID: https://orcid.org/0000-0002-3081-3868 (2016) A Simulation Study on Control Chart Performances in Monitoring Batch Production Processes. Masters thesis, Concordia University.

hajipour, farnaz (2016) ROBUST RADIOTHERAPY APPOINTMENT SCHEDULING. Masters thesis, Concordia University.

J

Jafari Nodoushan, Nader (2016) Robust Shelter Location/Allocation in Humanitarian Logistics Networks. Masters thesis, Concordia University.

Jeihoonian, Mohammad (2016) Closed-loop supply chain network design: Case of durable products. PhD thesis, Concordia University.

K

KAMKARRAD, HOSSEIN (2016) High Repetition Rate Laser Shock Peening on Biodegradable Magnesium Alloys. PhD thesis, Concordia University.

Kamel, Mohamed A. M. I. (2016) Cooperative Control of Multiple Wheeled Mobile Robots: Normal and Faulty Situations. PhD thesis, Concordia University.

Khan, Mohammad Asgar (2016) Investigation on the Autonomic Structural Self-Healing of FRPC using Microencapsulated 5E2N/Grubbs Catalyst System for Low Temperature Applications. PhD thesis, Concordia University.

Khorrami, Hamid (2016) Vibration Analysis of a Shaft-Disc System for On-line Crack Detection. PhD thesis, Concordia University.

L

Larin, Patrick André (2016) CFD Based Synergistic Analysis of Wind Turbine for Roof Mounted Integration. Masters thesis, Concordia University.

Li, Jian, Ning, Jianguo, Kiyanda, Charles B. and Ng, Hoi Dick (2016) Numerical simulations of cellular detonation diffraction in a stable gaseous mixture. Propulsion and Power Research . ISSN 2212540X

Li, Minhui (2016) A New Approach to Designing the Conical Point of a Twist Drill. Masters thesis, Concordia University.

Liu, Zhixiang (2016) Reliable and Safe Motion Control of Unmanned Vehicles. PhD thesis, Concordia University.

M

Mahdipoor, Mohammad Sadegh (2016) Water Droplet Erosion Resistant Materials and Surface Treatments. PhD thesis, Concordia University.

Medina Ramirez, Ana Maria (2016) PRODUCTION OF HIGHLY POROUS AL-NI FOAMS BY POWDER METALLURGY USING DOLOMITE AS A FOAMING AGENT. Masters thesis, Concordia University.

Mohammadbeigy, Shayesteh (2016) Optimum Representation of the Blade Shape and the Design Variables in Inverse Blade Design. Masters thesis, Concordia University.

Mohammadi, Morteza (2016) Droplet Impact and Solidification on Solid Surfaces in the Presence of Stagnation Air Flow. PhD thesis, Concordia University.

Mokabel, Ismail (2016) Importance of Managerial Accounting for a Successful Lean Transformation: A practical study at a large aerospace OEM. Masters thesis, Concordia University.

Moosavi, Seyed Hossein (2016) Does separating vaccinated and unvaccinated students in schools result in better health outcomes? An agent-based model for mumps. Masters thesis, Concordia University.

Morrison, Andrew (2016) An Electrochemical Treatment for Improving the Activity of Nickel and Other Metals for the Hydrogen Evolution and Other Reactions. PhD thesis, Concordia University.

Morteza Pouraghdam, Rasoul (2016) Numerical Analysis and Experiments on the Acoustics of Conch Shells Modelled as Spiral Cavities. Masters thesis, Concordia University.

N

NAKAYAMA, HARUKA, PORTARO, ROCCO, KIYANDA, CHARLES BASENGA and NG, HOI DICK (2016) CFD MODELING OF HIGH SPEED LIQUID JETS FROM AN AIR-POWERED NEEDLE-FREE INJECTION SYSTEM. Journal of Mechanics in Medicine and Biology, 16 (04). p. 1650045. ISSN 0219-5194

Naccache, Gabriel (2016) CFD Based Analysis and Parametric Study of a Novel Wind Turbine Design: the Dual Vertical Axis Wind Turbine. Masters thesis, Concordia University.

Nooraei Ashtiani, Negarin (2016) Building a sustainable lean culture: a holistic lean leadership model. Masters thesis, Concordia University.

O

Orimoloye, Kayode (2016) Experimental investigation of the Fe-rich regions in the Ce-Fe-{Ni, Si, Al}-B quaternary systems: High-throughput screening of magnetic phases. Masters thesis, Concordia University.

R

Rezania, Omid (2016) Anelastic Behavior of Suspension Plasma Sprayed Ceramic Coatings. Masters thesis, Concordia University.

Riad, Keroles B. (2016) Photocuring epoxy with quantum dots for 3D printing. Masters thesis, Concordia University.

S

Saber-Freedman, Noah (2016) A Data-Driven Decision Model for Combined Sewer Overflow Management using the Low-Impact Development Rapid Assessment Method. Masters thesis, Concordia University.

Saleh, Amr Abdelaziz Mostafa (2016) Effervescent Atomization of Suspensions in a Gaseous Cross Flow. PhD thesis, Concordia University.

Samadi, Niyusha (2016) Electrowetting-based Actuation of Model Biological Fluids. PhD thesis, Concordia University.

Seraj, Saemul (2016) Free vibration and dynamic instability analyses of doubly-tapered rotating laminated composite beams. Masters thesis, Concordia University.

V

Vakilimoghaddam, Farbid (2016) NUMERICAL INVESTIGATION OF HYDROGEN UNDER-EXPANDED JET FLOW CONSIDERING VISCOUS EFFECTS. Masters thesis, Concordia University.

X

Xiong, Wen (2016) Manufacturing and Fatigue Behavior of Thick Glass/Epoxy Composite Beams. Masters thesis, Concordia University.

Y

Yazdani Sarvestani, Hamidreza ORCID: https://orcid.org/0000-0002-7787-342X (2016) High-order Simple-input Methods for Thick Laminated Composite Straight and Curved Tubes. PhD thesis, Concordia University.

Ye, Wenjun (2016) Inverse Compensation of Hysteresis using Modified Generalized Prandtl-Ishlinskii Hysteresis Model. Masters thesis, Concordia University.

Younes, Amen Mansour Amer (2016) Semi-analytical Modeling Approach for Flow Boiling Heat Transfer in Uniformly Heated Horizontal Micro-Channels. PhD thesis, Concordia University.

Yu, Bin (2016) Fault-Tolerant Control with Applications to Aircraft Using Linear Quadratic Design Framework. PhD thesis, Concordia University.

Z

Zhang, Bo and Ng, Hoi Dick (2016) An experimental investigation of the explosion characteristics of dimethyl ether-air mixtures. Energy, 107 . pp. 1-8. ISSN 03605442

Zhang, Dingyu (2016) Organizational Structure and Process—An Analysis in Decision-Making. PhD thesis, Concordia University.

Zhu, Jiapu (2016) Parametric Modeling Program of Fillet End Mill. Masters thesis, Concordia University.

This list was generated on Fri Dec 13 03:03:09 2024 EST.
Back to top Back to top