Login | Register

Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2018

Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | S | T | V | W | Y | Z
Number of items: 66.


Abu-Thuraia, Hamza (2018) CFD Analysis of the Influence of Guide Vanes. Masters thesis, Concordia University.

Adegoke, Akolade (2018) Benchmarking Sustainability Performance of Ports. Masters thesis, Concordia University.

Akgunduz, Ali and Kazerooni, Helia (2018) A non-time segmented modeling for air-traffic flow management problem with speed dependent fuel consumption formulation. Computers & Industrial Engineering . ISSN 03608352 (In Press)

Ale ebrahim, Elnazsadat (2018) Fabrication of Ceramic Filtration Membrane Using Suspension Plasma Spray Process. Masters thesis, Concordia University.

Alfred raju, Alan victor (2018) Effect of environmental conditions on deformation of thin composite laminate made by 4D printing. Masters thesis, Concordia University.

Alglawe, Asama (2018) Design Supply Chain Based on Cost of Quality with Consideration of Quality Level. PhD thesis, Concordia University.

Alkhathami, Mesfer (2018) Modeling of a Dielectric Elastomer. Masters thesis, Concordia University.

Almuslmani, Majed and Ganesan, Rajamohan (2018) Vibration of tapered composite driveshaft based on the hierarchical finite element analysis. Composite Structures . ISSN 02638223 (In Press)

Arbabi, Araz (2018) Inverse Shape Design of Compressor and Turbine Stages Using a Commercial CFD Program. PhD thesis, Concordia University.

AskariHemmat, Mohammad Ali (2018) Path Planning Algorithms for Autonomous Mobile Robots. Masters thesis, Concordia University.


Bakalis, Georgios (2018) Numerical Modelling of Detonation Initiation via Shock Interaction with Multiple Flames. Masters thesis, Concordia University.

Bakhshi, Nima (2018) Process-Induced Defects during Tow Steering in Automated Fiber Placement: Experiment, Modeling and Simulation. Masters thesis, Concordia University.


Couedelo, Alexandre (2018) Robust Design of Distribution Networks Considering Worst Case Interdictions. Masters thesis, Concordia University.


Dargahi, Ashkan ORCID: https://orcid.org/0000-0003-1382-0502, Sedaghati, Ramin and Rakheja, Subhash (2018) On the properties of magnetorheological elastomers in shear mode: Design, fabrication and characterization. Composites Part B: Engineering . ISSN 13598368 (In Press)

Dilimulati, Aierken, Stathopoulos, Ted and Paraschivoiu, Marius (2018) Wind turbine designs for urban applications: A case study of shrouded diffuser casing for turbines. Journal of Wind Engineering and Industrial Aerodynamics, 175 . pp. 179-192.


Eimanlou, Mehran (2018) Investigation of the effect of process parameters on bond strength of thermoplastic composite rings manufactured using fiber laser. Masters thesis, Concordia University.


Fallah, Panteha (2018) Fabrication and optimization of 3D metallic parts using electroplating of additively manufactured parts. Masters thesis, Concordia University.

Fang, Guoxin, Matte, Christopher-Denny ORCID: https://orcid.org/0000-0001-8218-295X, Kwok, Tsz-Ho ORCID: https://orcid.org/0000-0001-7240-1426 and Wang, Charlie C.L. (2018) Geometry-based Direct Simulation for Multi-Material Soft Robots. In: IEEE International Conference on Robotics and Automation, May 21-25, 2018, Brisbane, Australia.

Foroughi, Shervin (2018) Additive Manufacturing of Free Standing Structure from Thermally Cured Resins. Masters thesis, Concordia University.


Ghafouri Azar, Siavash (2018) Three-Dimensional Simulation of Coating Build-up In Suspension Plasma Spray Process. Masters thesis, Concordia University.

Ghamary, Yasser (2018) Multi-Project Multi-Mode Resource Constrained Scheduling Problem with Material Ordering. Masters thesis, Concordia University.

Gharaaty, Sepehr, Shu, Tingting, Joubair, Ahmed, Xie, Wen Fang and Bonev, Ilian A (2018) Online pose correction of an industrial robot using an optical coordinate measure machine system. International Journal of Advanced Robotic Systems, 15 (4). p. 172988141878791. ISSN 1729-8814

Gharabegi, Norvan (2018) Composite Laminates Made by Automated Fiber Placement of Dry Fibers and Vacuum Assisted Resin Transfer Molding. Masters thesis, Concordia University.

Ghiasi Hafezi, Gita ORCID: https://orcid.org/0000-0001-8296-6674 (2018) Canadian Nanotechnology and Equity Challenges: Implications for Pro-Poor and Gender-Inclusive Policy. PhD thesis, Concordia University.

Ghobadi, Kimia, Lee, Taewoo, Mahmoudzadeh, Houra and Terekhov, Daria (2018) Robust inverse optimization. Operations Research Letters . ISSN 01676377 (In Press)

Gorjipoor, Alireza (2018) Failure Analysis of Thick Composite Flexural Plates Constrained by Bolt Joints. PhD thesis, Concordia University.

Gupta, Shambhu Kumar (2018) Thermal Cycle Effects on Laminated Composite Plates Containing Voids. PhD thesis, Concordia University.


Hazrati Ashtiani, Iman ORCID: https://orcid.org/0000-0002-3192-3196 (2018) Safety investigation of partially filled railway tank cars. PhD thesis, Concordia University.

Heppa, Matthias (2018) The impact of direct digital manufacturing on supply chain operations, cost and environmental performance in an aerospace application. Masters thesis, Concordia University.

Hof, Lucas Abia ORCID: https://orcid.org/0000-0002-0495-9572 (2018) High-precision micro-machining of glass for mass-personalization. PhD thesis, Concordia University.



Jagadeesh, Satvik (2018) Development of Machine Vision Based Workstation for Laser Micromachining. Masters thesis, Concordia University.


Karamzadeh, Vahid (2018) Additive Manufacturing of Polymer-based Microfluidic Devices. Masters thesis, Concordia University.

Kumar, Rahul (2018) Study on Optical Properties and Stability of Gold Nanostars for Localized Surface Plasmon Resonance (LSPR) based Biosensing Applications. Masters thesis, Concordia University.


Li, Pengcheng, Zeng, Rui, Xie, Wenfang and Zhang, Xiaoming (2018) Relative posture-based kinematic calibration of a 6-RSS parallel robot by optical coordinate measurement machine. International Journal of Advanced Robotic Systems, 15 (2). pp. 1-14. ISSN 1729-8814


M-BORNAY, BAHMAN ORCID: https://orcid.org/0000-0001-9351-9968 (2018) OPTIMIZATION OF RAILWAY TRANSPORTATION HAZMATS AND REGULAR COMMODITIES. Masters thesis, Concordia University.

Madani, Masoud (2018) Dynamic Facility Location with Stochastic Demand and Congestion. Masters thesis, Concordia University.

Mi, Xiaocheng, Higgins, Andrew J., Kiyanda, Charles Basenga, Ng, Hoi Dick and Nikiforakis, Nikos (2018) Effect of spatial inhomogeneities on detonation propagation with yielding confinement. Shock Waves, 28 . pp. 993-1009.

Murugesan, Ezhil Shakti (2018) Conceptual Design Analysis for an Aircraft Auxiliary Photovoltaic System. Masters thesis, Concordia University.


Nakhle, Wissam ORCID: https://orcid.org/0000-0003-3367-7504 (2018) Development of A Rheological Measurement Technique to Study Diffusion in Molten Polystyrene. PhD thesis, Concordia University.

Neriya Hegade, Keshava Praveena (2018) Studies on droplet-microcantilever platform under fluid flow in mini wind tunnel. Masters thesis, Concordia University.


Pugh, Martin D., Nikonam M., Raheleh and Drew, Robin A.L. (2018) Formation mechanism of porous reaction-bonded silicon nitride with interconnected pores in the presence of MgO. Journal of the European Ceramic Society . ISSN 09552219 (In Press)


Qiao, Jing (2018) Trajectory Tracking and Payload Dropping of an Unmanned Quadrotor Helicopter Based on GS-PID and Backstepping Control. Masters thesis, Concordia University.


Seede, Raiyan, Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106, Vladimir, Brailovski, Mohammad, Jahazi and Medraj, Mamoun (2018) Microstructural and Microhardness Evolution from Homogenization and Hot Isostatic Pressing on Selective Laser Melted Inconel 718: Structure, Texture, and Phases. Journal of Manufacturing and Materials Processing, 2 (2). p. 30. ISSN 2504-4494

Seraj, Saemul and Ganesan, Rajamohan (2018) Dynamic instability of rotating doubly-tapered laminated composite beams under periodic rotational speeds. Composite Structures, 200 . pp. 711-728. ISSN 02638223 (In Press)

Sharifi, Navid (2018) Developing Superhydrophobic Coatings for Mitigating Aircraft Icing using Plasma Spray Processes. PhD thesis, Concordia University.

Shetabivash, Hasan (2018) A Multiple Level-Set Approach for Modeling Unconstrained Solidification. PhD thesis, Concordia University.

Ste-Marie, Samuel (2018) Thermostamping of Long-Fiber Thermoplastic Composites: Consideration of Wrinkles, Distortions, and Cost. Masters thesis, Concordia University.

Sundaresan, Navaneethan ORCID: https://orcid.org/0000-0001-8130-269X (2018) A Study of negative feedback damping property of roll-coupled hydro-pneumatic suspensions. Masters thesis, Concordia University.


Tanash, Moayad (2018) Hub Network Design and Discrete Location: Economies of Scale, Reliability and Service Level Considerations. PhD thesis, Concordia University.

Tang-Yuk, Kelsey C., Mi, Xiaocheng, Lee, John H.S. and Ng, Hoi Dick (2018) Transmission of a detonation across a density interface. Shock Waves, 28 . pp. 967-979.

Taylor, Leslie (2018) Large eddy simulation of oscillating and deforming airfoils. Masters thesis, Concordia University.

Tohidi, Mohammad (2018) Physicians Scheduling In Polyclinics. PhD thesis, Concordia University.


Verma, Akarsh, Parashar, Avinash and Packirisamy, M. (2018) Effect of grain boundaries on the interfacial behaviour of graphene-polyethylene nanocomposite. Applied Surface Science . ISSN 01694332 (In Press)


Wang, Ban ORCID: https://orcid.org/0000-0001-8002-1263 (2018) Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles. PhD thesis, Concordia University.

Wang, Tian (2018) Phase equilibria and permanent magnets in the Ce-Fe-Co-B system. PhD thesis, Concordia University.

Wang, Tian and Medraj, Mamoun (2018) Magnetic force microscopic study of Ce 2 (Fe, Co) 14 B, and its modifications by Ni and Cu. Journal of Magnetism and Magnetic Materials . ISSN 03048853 (In Press)

Wang, Tianjiao, Kwok, Tsz-Ho ORCID: https://orcid.org/0000-0001-7240-1426, Zhou, Chi and Vader, Scott (2018) In-situ droplet inspection and closed-loop control system using machine learning for liquid metal jet printing. Journal of Manufacturing Systems, 47 . pp. 83-92. ISSN 02786125

Wu, Xingwen (2018) An Investigation of High-Order Polygonal Wheel Wear in High-speed Rail Vehicles. PhD thesis, Concordia University.


Yang, Pengfei, Teng, Honghui, Jiang, Zonglin and Ng, Hoi Dick (2018) Effects of inflow Mach number on oblique detonation initiation with a two-step induction-reaction kinetic model. Combustion and Flame, 193 . pp. 246-256.

Yang, Tianlin (2018) An Accurate FEA of Turning Simulation and Parameters Optimization for Slender Shaft Turning. Masters thesis, Concordia University.

Yoong, Hou-Pin (2018) Design, Fabrication, Modeling and Control of Artificial Muscle Actuated Wrist Joint System. PhD thesis, Concordia University.


Zeinaly Fashtali, Ghazaale (2018) Design and Development of a New Innovative Transcatheter Mitral Valve. Masters thesis, Concordia University.

Zetina, Carlos ORCID: https://orcid.org/0000-0001-5502-3232 (2018) Network design under uncertainty and demand elasticity. PhD thesis, Concordia University.

Zhang, Yining, Yang, Pengfei, Teng, Honghui, Ng, Hoi Dick and Wen, Chihyung (2018) On the transition between different initiation structures of wedge-induced oblique detonations. AIAA Journal, 56 . pp. 4016-4023.

Zhang, Yining, Zhou, Lin, Gong, Jishuang, Ng, Hoi Dick and Teng, Honghui (2018) Effects of activation energy on the instability of oblique detonation surfaces with a one-step chemistry model. Physics of Fluids, 30 (106110).

This list was generated on Mon Dec 11 03:05:30 2023 EST.
Back to top Back to top