Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2022

A

Abdalaziz, Moustafa (2022) Development, Modeling and Design Optimization of a Variable Stiffness and Damping Bypass MR Fluid Damper with Annular-Radial Gap. PhD thesis, Concordia University.

Ahmadi, Bahar (2022) Hybrid Vision and Force Control in Robotic Manufacturing Systems. PhD thesis, Concordia University.

Alam, Mohammad Jahidul (2022) Multiple Drone and Truck Arc Routing Problem. Masters thesis, Concordia University.

Amirifar, Tolou (2022) An NLP-Deep Learning approach for Product Rating Prediction Based on Online Reviews and Product Features. Masters thesis, Concordia University.

Andam, Arian (2022) Operating room planning with the pooling of downstream beds among specialties: A stochastic programming approach. Masters thesis, Concordia University.

Ansari, Abdul Moiz Abdul Rahim (2022) A bilevel product pricing problem with ranks and utilities: Models and Algorithms. Masters thesis, Concordia University.

arab, ashkan (2022) analysis of the hydrogen embrittlement susceptibility of industrial zn-ni brush plating process. Masters thesis, Concordia University.

B

Bao, Jie (2022) Turbulence Modelling with Deep Neural Networks. Masters thesis, Concordia University.

Bian, Jing, Zhou, Lin, Yang, Pengfei, Teng, Honghui and Ng, Hoi Dick ORCID: https://orcid.org/0000-0002-8459-5990 (2022) A Reconstruction Method of Detonation Wave Surface Based on Convolutional Neural Network. Fuel, 315 . p. 123068. ISSN 0016-2361

C

cliche, marie-laurence (2022) Influence of fiber direction and temperature on the tribological behavior of carbon reinforced PEEK for applications in gas turbine engines. Masters thesis, Concordia University.

D

Darwish, Ahmed Mohamed Diaaeldeen Ahmed ORCID: https://orcid.org/0000-0002-4681-7628 (2022) In vitro investigation of the flow dynamic characteristics downstream of a dysfunctional bileaflet mechanical aortic valve. PhD thesis, Concordia University.

Delavari, Mohammad Mohsen (2022) Synthesizing and Characterizing Advanced Biodegradable Wound Dressings. PhD thesis, Concordia University.

E

Ebrahimi Orimi, Hamid (2022) Development of a novel laser-induced side transfer process for bioprinting. PhD thesis, Concordia University.

Ehsani, Farid (2022) Automated Dry Fiber Placement and Resin Infusion for Fabrication of Composite Aerostructures. Masters thesis, Concordia University.

F

FANG, ZIXI (2022) A Novel Geometric Theory of On-Machine Tool Measurement and Practical, Optimal Approaches to Highly Accurate and Efficient On-Machine Measurement. PhD thesis, Concordia University.

Farahani, Emad (2022) Development of self-lubricating icephobic coatings. Masters thesis, Concordia University.

Feng, Haibo (2022) A Practical, Direct Approach for Fusion of Tool Size Measurement and Flank Wear Prediction of End-Mills in Machining. Masters thesis, Concordia University.

Fukushima, Kazuteru (2022) Geometric Parameter Analysis of H-Darrieus Wind Turbines Based on 3D CFD. Masters thesis, Concordia University.

G

Ghoreshilangrodi, Seyedramin ORCID: https://orcid.org/0000-0001-7604-0226 (2022) Vorticity-Based Polynomial Adaptation for Unsteady Flows. PhD thesis, Concordia University.

H

Habibi, Mohsen, Foroughi, Shervin, Karamzadeh, Vahid and Packirisamy, Muthukumaran ORCID: https://orcid.org/0000-0002-1769-6986 (2022) Direct Sound Printing. Nature Communications, 13 (1800). ISSN 2041-1723

Hadaeghnia, Milad ORCID: https://orcid.org/0000-0002-1098-2285 (2022) DESIGN AND PREPARATION OF ELECTRICALLY CONDUCTIVE GRAPHENE NANOCOMPOSITES BASED ON PA6/POE. PhD thesis, Concordia University.

Hajializadehkouchak, Farshid (2022) Development of a high-performance artificial neural network model integrated with finite element analysis for residual stress simulation of the direct metal deposition process. PhD thesis, Concordia University.

Ho Kwok, Tsz (2022) Improving the diversity of topology-optimized designs by swarm intelligence. Structural and Multidisciplinary Optimization, 65 (202).

I

Ibrahim, Mohamed Elhadi Mohamed (2022) Threshold Velocity and Incubation Period in Water Droplet Erosion. PhD thesis, Concordia University.

Ilie, P (2022) Fatigue Crack Growth Life Assessment Using 3D Finite Element Analysis. Masters thesis, Concordia University.

J

Jalilvand, Vahid (2022) Thermal Spray Coating Development of Inert Anode for Aluminum Electrolysis Process. PhD thesis, Concordia University.

K

K. Akberali, Amar Fayyad (2022) Dynamics and Performance of Tethered Airborne Wind Energy Systems. Masters thesis, Concordia University.

Kadam, Karuna Dhananjai (2022) Application of Lean in High-Mix Low-Volume Production Systems: A Case Study in the Architectural Lighting Industry. Masters thesis, Concordia University.

Kashefinishabouri, Farzad (2022) A Technique for Real-Time Detection of Defects in Composite Structure using Carbon nanotubes, and Transfer Learning. Masters thesis, Concordia University.

Khodashenas, Hamidreza (2022) Real-time Neural Force Estimation and Model-free Control of Interventional Catheters. Masters thesis, Concordia University.

Kwakye-Nimo, Shadrach (2022) Rheological characterization of polymer melts with bimodal distributions. PhD thesis, Concordia University.

Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 (2022) Improving the diversity of topology-optimized designs by swarm intelligence. Structural and Multidisciplinary Optimization .

L

Le, Dang (2022) Two-stage route planning algorithm for last mile delivery. Masters thesis, Concordia University.

M

Miquet-Westphal, Floriane (2022) Polymer Nanocomposite Platforms for Electromagnetic Shielding. Masters thesis, Concordia University.

Mirniazy, Kian ORCID: https://orcid.org/0000-0002-1414-2726 (2022) Supervised Deep Learning with Finite Element Synthetic Data for Force Estimation in Robotic-assisted Surgery. Masters thesis, Concordia University.

Moghadamazad, Mehrshad (2022) A Comprehensive Heat Transfer Analysis for Thermoplastic Composites Made by Automated Fiber Placement Using Hot Gas Torch. Masters thesis, Concordia University.

Mohammadi Pour Khajani, Shayan (2022) a study on the feasibility of 3D micromachining and micro-molding using nanosecond laser. Masters thesis, Concordia University.

Molaei, Amir (2022) Modeling and Indirect Force/Position Control of Slender Continuum Robots. PhD thesis, Concordia University.

Moradi, Vahid (2022) Application of Digital-Twin Technology for the Job-Shop Scheduling Problem. Masters thesis, Concordia University.

Mu, Xinzhao (2022) Thermodynamic Modelling and Experimental Investigation of 3D Printed Inconel 718 Superalloy. Masters thesis, Concordia University.

Mustafa, Irfan and Kwok, Tsz (2022) Interlacing Infills for Multi-Material Fused Filament Fabrication Using Layered Depth Material Images. Micromachines, 13 (5). p. 773.

N

Namaki, Hafez (2022) Alumina-Graphene Nanoplatelet Coatings Using Aerosol Deposition Technique. Masters thesis, Concordia University.

Nazarudeen, Saad Bin (2022) A Model based Safety Assessment for Multirotors. Masters thesis, Concordia University.

P

Portaro, Rocco (2022) Liquid Needle Free Injectors: Design and Analysis of Power Sources. PhD thesis, Concordia University.

Portaro, Rocco and Ng, Hoi Dick ORCID: https://orcid.org/0000-0002-8459-5990 (2022) Design and Analysis: Servo-Tube-Powered Liquid Jet Injector for Drug Delivery Applications. Applied Sciences, 12 (14). p. 6920. ISSN 2076-3417

R

Rabiei, Mohammadreza (2022) Finite element simulation and reliability assessment of mode-I and mode-II delamination testing of composite laminates. Masters thesis, Concordia University.

Rahman, Md Masiar (2022) Surface Preparation for Suspension Plasma Sprayed Ceramic Coatings on Metallic Substrate. PhD thesis, Concordia University.

Rajasekaran, Aadhithya (2022) Steering of Thermoplastic Composite Tapes using Hot Gas Torch-assisted Automated Fiber Placement. Masters thesis, Concordia University.

Rodriguez, Carlos Daniel (2022) An Architecture-Based Weight Estimation Method for Aircraft Fuel Systems. Masters thesis, Concordia University.

S

Sadek, Jad (2022) Development of a Needle-Free Liquid Jet Injection Technology by Pressure-Gain Combustion. PhD thesis, Concordia University.

Sedigh Rahimabadi, pooria (2022) Surface Preparation of Polymer Composites Embedded Metal Mesh for Coating Using Optimized Grit-Blasting Process and Image Analysis. Masters thesis, Concordia University.

Sun, Xuxu, Yan, Chian, Yan, Yiran, Mi, Xiaocheng, Lee, John H.S. and Ng, Hoi Dick (2022) Critical Tube Diameter for Quasi-Detonations. Combustion and Flame, 244 .

Supekar, Raunak ORCID: https://orcid.org/0000-0002-5055-6264 (2022) Tribological response of thermally sprayed high entropy alloys for aerospace applications. Masters thesis, Concordia University.

T

Tang-Yuk, K.C., Lee, J.H.S., Ng, H.D., Deiterding, R. and Mi, X.C. (2022) The re-initiation of cellular detonations downstream of an inert layer. Proceedings of the Combustion Institute . ISSN 1540-7489 (In Press)

Tang-Yuk, K.C., Mi, X.C., Lee, J.H.S., Ng, H.D. and Deiterding, R. (2022) Transmission of a detonation wave across an inert layer. Combustion and Flame, 236 (111769). ISSN 1556-2921

Tang, Jianyu (2022) Accuracy Improvement of Industrial Robot Using PID Controller Based on Back-propagation Neural Networks. Masters thesis, Concordia University.

Tavassoli Naini, Sina (2022) Design, Modelling and Control of an Adaptive Vibration Isolator Featuring Magnetorheological Elastomer. Masters thesis, Concordia University.

Tonge, Parikshit (2022) Tribological evaluation of environmentally friendly MoS2 based solid film lubricants for gas turbine engines. Masters thesis, Concordia University.

Torkaman, Tannaz (2022) Soft Embedded Sensors with Learning-based Calibration for Soft Robotics. Masters thesis, Concordia University.

W

Wang, Yimei (2022) Development of MRE-based Semi-Active Seat Suspension System for the Mitigation of Whole-Body Vibration. Masters thesis, Concordia University.

X

Xing, Zhewen (2022) Wind Estimation and Control of Unmanned Aerial Vehicles with Application to Forest Fire Surveillance. PhD thesis, Concordia University.

Y

Yan, Zhen, Chen, Mingyuan and Chauhan, Satyaveer S. (2022) Production Planning and Scheduling with Time-Related Processing Cost Considerations for a Heat Treatment Shop. Masters thesis, Concordia University.

Yang, Tianqi (2022) Tracking Control of Autonomous Vehicles. Masters thesis, Concordia University.

Z

Zahiri, Parisa (2022) Bankruptcy Prediction by Deep Learning and Machine Learning Methods. Masters thesis, Concordia University.

Zhang, Yintao (2022) Path Planning and Control of UAV using Machine Learning and Deep Reinforcement Learning Techniques. PhD thesis, Concordia University.

Zheng, Zhou (2022) Development and Performance Analyses of Non-Pneumatic Wheels with Honeycomb Spokes. PhD thesis, Concordia University.

Zhou, Tao (2022) Enhancing the Path Accuracy of an Industrial Robot with Visual Servoing and Reinforcement Learning. Masters thesis, Concordia University.

Zoka, Hooman (2022) An Investigation on the Nonlinear Vibration Behavior of Mistuned Bladed Disk Assemblies. Masters thesis, Concordia University.