Login | Register

Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2023

Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | O | P | R | S | T | W | Y | Z
Number of items: 64.

A

Abdollahi, Ilda (2023) Investigation on Macroscopic Mechanical Behavior of Magnetorheological Elastomers under Shear deformation, using Microscale Representative Volume Element Approach. Masters thesis, Concordia University.

Abrishami Movahhed, Arezoo (2023) Design and Testing of a Complete Heart Soft Robotic Compression Device. Masters thesis, Concordia University.

Alam, Maksudul (2023) Multidisciplinary Optimization of Shoe Midsole Structures using Tetrahedral Mesh Generation and Swarm Intelligence. Masters thesis, Concordia University.

Ale ebrahim, Elnazsadat (2023) Tailoring the Microstructure of Photoactive Ceramic Membranes Deposited by Suspension Plasma Spraying. PhD thesis, Concordia University.

Alessandroni, Nicolás ORCID: https://orcid.org/0000-0002-6595-0969, Byers-Heinlein, Krista ORCID: https://orcid.org/0000-0002-7040-2510, Alasmar, Zaki, Bong, Ji Yae, Chalifour, Joshua ORCID: https://orcid.org/0000-0001-7663-0509, Dennie, Danielle ORCID: https://orcid.org/0000-0003-3771-2450, Dugré, Mathieu, Fibla-Reixachs, Laia, Glatard, Tristan, Harris, Rachel ORCID: https://orcid.org/0000-0002-7356-0127, Johnson, Aaron P., Khelifa, Rassim, Kos, Gregor, Moore, Charlotte, Peres-Neto, Pedro R., López Pérez, Melanie, Quirk, Erin, Sander-Montant, Andrea, Savary, Paul, Steele, Christopher, Vermeire, Brian C. and Williams, Madison (2023) Recommendations for Fostering Open Science at Concordia University. Working Paper. Concordia University, Montréal. (Unpublished)

B

Bakalis, Georgios, Valipour, Maryam, Bentahar, Jamal, Kadem, Lyes, Teng, Honghui and Ng, Hoi Dick ORCID: https://orcid.org/0000-0002-8459-5990 (2023) Detonation Cell Size Prediction based on Artificial Neural Networks with Chemical Kinetics and Thermodynamic Parameters. Fuel Communications, 14 (100084).

Bamrah, Parush (2023) Zonal Safety and Particular Risk Analysis for Early Aircraft Design using Parametric Geometric Modelling. Masters thesis, Concordia University.

Belabes, Belkacem (2023) numerical study of vertical axis wind turbine performance in turbulent flows and behind turbine wakes. PhD thesis, Concordia University.

Bidmeshki, Cyrus (2023) Microstructural, mechanical, and tribological evaluation of thermally sprayed wear-resistant coatings for aerospace applications. Masters thesis, Concordia University.

Bily, Alexandre (2023) Development of Titanium Diboride Wettable Cathodes for Aluminium Electrolysis by Suspension Plasma Spray. PhD thesis, Concordia University.

Blons, Hugo (2023) Experimental Investigation of the Flow Dynamics in Models of Patient-Specific Aneurysms. Masters thesis, Concordia University.

C

Chaghazardi, Zahra (2023) Data-Driven Approach for Personalization of Electropolishing Operations in Used Baths. PhD thesis, Concordia University.

Chevalier, Théo (2023) Investigating Vortex Ring Reconnection in Twin Parallel Pulsed Jets: Influence of Nozzle Spacing and Stroke Ratio. Masters thesis, Concordia University.

D

Derakhshani Dastjerdi, Mina (2023) Uncured Thermoset Towpreg Tensile Characterisation: Experimental and Finite Element Analyses. Masters thesis, Concordia University.

E

El Bouzouiki, Mohamed (2023) A Non-Uniform Cellular Automata Approach for the Design Optimization of Truss Structures. PhD thesis, Concordia University.

El-Khoury, Andréa (2023) Design and Validation of an Experimental Heart Model for the Evaluation of Cardiopulmonary Resuscitation Procedure Performance. Masters thesis, Concordia University.

Elfar, Mohamed (2023) Modelling And Design Optimization of Compound Thick-Walled Cylinders Treated with Autofrettage, Shrink-Fit, And Wire-Winding Processes. PhD thesis, Concordia University.

F

Famouri, Seyedfarzad (2023) Surgical skills modeling in cardiac ablation using deep learning. Masters thesis, Concordia University.

Fatile, Oluwagbenga ORCID: https://orcid.org/0000-0001-9928-9366 (2023) Fabrication Characteristics and Performance Enhancement of Nb18W16O93 and MoNb12O33 Nanowires for Lithium-Ion Batteries Application. PhD thesis, Concordia University.

G

Ghazal, Abdallah M. S. (2023) Hydrodynamics of placing off-bottom plugs in oil and gas wells. PhD thesis, Concordia University.

H

Haghgooye Shafagh, Saber (2023) Electrically Conductive Polymer Nanocomposite Platforms for Routing: Modeling, Fabrication, and Verification. Masters thesis, Concordia University.

Hu, shaocheng (2023) A Practical On-Machine Tool Condition Monitoring Approach to Predicting Reamer Tool Life. Masters thesis, Concordia University.

Hvingelby, Chelsey (2023) Effects of Processing Time Distributions and Rescheduling Policies on Efficiency and Instability for Single Machine Settings. Masters thesis, Concordia University.

I

Iranmanesh, Nazanin (2023) Impact Performance of 3D Printed Sandwich Structures: The Role of Core Geometry in Energy Absorption. Masters thesis, Concordia University.

J

Jadidi, Saeedreza (2023) Intelligent Cyber-Physical Monitoring, Fault-Tolerant, and Attack-Resilient Control of Renewable Energy Systems in Smart Grid. PhD thesis, Concordia University.

K

Karimi, Kimia (2023) Vibrations of Uniform-Thickness Longitudinally-Tapered Laminated Composite Pipes Conveying Fluid. Masters thesis, Concordia University.

Kazeruni, Mehrnoosh (2023) Artificial Neural Network Modeling Approach for Elastic Plastic Stress and Strain Computation for Notched Components. Masters thesis, Concordia University.

Khatibnezhad, Hediyeh (2023) Photoactive TiO2 coatings by suspension plasma spraying. PhD thesis, Concordia University.

Khoshbakht, Reza (2023) Force Estimation and Shape Reconstruction of Soft Robots in Contact with Fluid Flow: theory and experiment. Masters thesis, Concordia University.

Kolokotronis, Christina and Vermeire, Brian C. (2023) Feature-Based Polynomial Adaptation for High-Order Methods Applied to Martian Aerodynamics. Masters thesis, Concordia University.

L

Lalalain, Alex (2023) Application of GPU Accelerated Paired Explicit Runge-Kutta Methods to Turbulent Flow Over a Sphere. Masters thesis, Concordia University.

Li, Shun (2023) Early Wildfire Detection, Geolocation, and 3D Reconstruction Using Aerial Visible and Infrared Images. Masters thesis, Concordia University.

Lyu, Yifan (2023) Numerical investigation of gaseous cellular detonation propagation in rough-walled channels. Masters thesis, Concordia University.

M

Masoud, Amel Monirian (2023) Exact Approaches for a Class of Nonlinear Discrete Facility Location and Network Design Problems. PhD thesis, Concordia University.

Mohan, Vijesh (2023) Framework and Model Development for Aircraft Systems Integration in Conceptual-level Multidisciplinary Design Analysis. Masters thesis, Concordia University.

Morales, Jomar (2023) A Novel Semi-Active Control Approach for Flexible Structures: Vibration Control through Boundary Conditioning using Magnetorheological Elastomers. Masters thesis, Concordia University.

O

Omidi, Mohammad (2023) Experimental studies on mixing of yield stress fluids in a magnetic stirrer. Masters thesis, Concordia University.

Ordonselli, Sara (2023) Removing Carbon Black Pigment from ABS Material. Masters thesis, Concordia University.

Ouedraogo, Newton Fabrice (2023) Numerical study of the wake characteristics of a notchback Ahmed body. Masters thesis, Concordia University.

P

Pang, Junyi (2023) An Effective Method for Milling Tool Condition Monitoring Using On-machine Measurement. Masters thesis, Concordia University.

Patel, Payank Jagdishbhai (2023) Development, Characterization and Performance Assessment of High Entropy Coatings (HECs) Deposited Through Various Thermal Spray Methods. PhD thesis, Concordia University.

Payandehjoo, Baanu (2023) Embedding Ionic Hydrogel in 3D Printed Human-Centric Devices for Mechanical Sensing. Masters thesis, Concordia University.

Payandehjoo, Baanu and Ho Kwok, Tsz (2023) Embedding ionic hydrogel in 3D printed human-centric devices for mechanical sensing. Journal of Manufacturing Processes . (In Press)

Pereira, Carlos A (2023) Solution-Acceleration Strategies for High-Order Unstructured Methods. PhD thesis, Concordia University.

R

Rahimidehban, Kian (2023) Performance Measurement in Supply Chain Greenhouse Gas Accounting: Assessing the State of the Practice. Masters thesis, Concordia University.

Ravichandran, Srinath (2023) Thermal Characterization of Honeycomb and Foam Core Sandwich Structures: Experiment and Modelling. Masters thesis, Concordia University.

Roshanfar, Majid ORCID: https://orcid.org/0000-0003-3738-7782 (2023) Dynamics of Hybrid-Actuated Soft Robots with Stiffness Adaptation for Robot-Assisted Interventions. PhD thesis, Concordia University.

Roy, Amit (2023) Friction and Wear Behavior of Thermally Sprayed Oxide Coatings. PhD thesis, Concordia University.

S

Saboukhi, Alireza (2023) Designing and implementing a small-size Automated Fiber Placement (AFP) head capable of depositing thermoset layers on V-shape structures. Masters thesis, Concordia University.

Samadi, Sevin (2023) DESIGN OF A LINE FIELD OPTICAL COHERENCE TOMOGRAPHY FOR IMAGING APPLICATIONS. PhD thesis, Concordia University.

Seyed Mortazavi, Seyed Navid (2023) Driving force computation for fatigue crack growth based on the integration of fracture mechanics with artificial neural networks. PhD thesis, Concordia University.

Shirouyeh, Koosha (2023) Star Scientists’ Prediction in the Field of Artificial Intelligence Using Machine Learning Techniques. Masters thesis, Concordia University.

Shokri, Shiva (2023) Closed-Loop Control of Surface Preparation for Metallizing Fiber-Reinforced Polymer Composite. Masters thesis, Concordia University.

Shu, Tingting ORCID: https://orcid.org/0000-0002-1213-0609 (2023) Visual Servoing-Based Dynamic Accuracy Enhancement of Industrial Robots by Using Photogrammetry Sensor. PhD thesis, Concordia University.

T

Tabesh, Nikta (2023) A Model-Based System Engineering Approach to Support System Architecting Activities in Early Aircraft Design. Masters thesis, Concordia University.

Taki, Salar (2023) Model-free Control of Soft Robots for Intraluminal Surgical Intervention. Masters thesis, Concordia University.

Tusher, Md Mehide Hasan (2023) Very high cycle fatigue characterization of additive manufactured Ti-6Al-4V alloys. Masters thesis, Concordia University.

W

Warren, Robin (2023) Integrating Advanced Sizing and Controllability Assessment Methods into an MDO Framework for Optimal Redundancy in UAV Design. Masters thesis, Concordia University.

Y

Yan, Chian ORCID: https://orcid.org/0000-0002-3297-7428 (2023) Numerical study of the effect of instability on detonation dynamics and critical phenomena. PhD thesis, Concordia University.

Yan, Chian, Ng, Hoi Dick ORCID: https://orcid.org/0000-0002-8459-5990 and Mi, Xiaocheng (2023) A numerical study on the influence of increased instability of quasi-detonation on the critical tube diameter phenomenon. Proceedings of the Combustion Institute . (In Press)

Yazdanpanah Moghadam, Ehsan (2023) Alzheimer Model on Chip: Mechanobiology Study of Microglia Cells. PhD thesis, Concordia University.

Ye, Wenjun (2023) Modeling and Control of Dielectric Elastomer Enabled Actuators for Soft Robots. PhD thesis, Concordia University.

Z

Zabihollah, Shakila (2023) Modelling, Design Optimization, and Experimental Characterization of Miniaturized Pneumatic Artificial Muscles. Masters thesis, Concordia University.

Zare, Maryam (2023) Analysis and Topology Optimization of Adaptive Sandwich Plates treated with Magnetorheological Elastomer core layer. Masters thesis, Concordia University.

This list was generated on Sun Jun 16 03:05:27 2024 EDT.
Back to top Back to top