Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2025

B

Boissinot, Antoine (2025) Aeroelasticity and gust response of wings equipped with a distributed propulsion system. Masters thesis, Concordia University.

C

Cobeña, Brenda ORCID: https://orcid.org/0000-0002-0130-3308 (2025) Hub-line location problems with elastic demands and their application in the design of urban mobility hubs. PhD thesis, Concordia University.

E

Eftekhari, Hosna (2025) Influence of hydrogen on the electrical resistivity of 4340 and 300M high-strength steels. Masters thesis, Concordia University.

Elkhatib, Mohammed ORCID: https://orcid.org/0009-0000-5162-230X (2025) Efficient Mapping and Navigation System for Weed Removal Robot in Confined Garden Spaces. Masters thesis, Concordia University.

F

Fotoohinezhadkhales, Mostafa (2025) Microstructure and tribological performance of cu-based and self-lubricating coatings via low-temperature thermal spray. Masters thesis, Concordia University.

K

Kheradpisheh, Meisam (2025) Prediction of In-Plane and Out-of-Plane Defects in Steered Prepreg Tape during Automated Fiber Placement: Experimental and Analytical Modeling. PhD thesis, Concordia University.

M

Mandegarian, Sepanta (2025) Impact Behavior of Hybrid Thermoplastic Composite Laminates and Sandwich Panels. PhD thesis, Concordia University.

Mariyam Thomas, Aswathy (2025) Mechano-Pneumatic Wheel: Feasibility Analysis of the Concept and Parametric Optimization. Masters thesis, Concordia University.

Masoumi, Navid ORCID: https://orcid.org/0009-0009-2323-4970 (2025) Deep Transformational Calibration of Soft Embedded Sensors for Soft Surgical Robots. Masters thesis, Concordia University.

Mazidi, Mohammad (2025) Robust Haptics with Nonlinear Impedance Matching for Robot-assisted Laparoscopic Surgery. Masters thesis, Concordia University.

P

Purohit, Dharik (2025) Optimizing and Validating the Performance of a Low-cost Potentiostat for In-Situ Flow Battery Testing. Masters thesis, Concordia University.

S

Safizadeh, Sara, Wuthrich, Rolf and Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 (2025) Stress and Crack Analysis in PBF-LB IN738 with Heat Treatment. International Journal of Advanced Manufacturing Technology .

W

Wu, Jiuda (2025) Nonreciprocal Vibration Transmission in Discrete Periodic Systems with Spatiotemporal Modulations. PhD thesis, Concordia University.

X

Xia, Bingze ORCID: https://orcid.org/0009-0007-8121-8026 (2025) AI-Enabled Uncrewed Aircraft System Traffic Management Methods: Hybrid Intelligence for Autonomous Navigation and Swarm Control. PhD thesis, Concordia University.