Items where Division is "Mechanical and Industrial Engineering" and Year is 2014

Article

Gao, Y., Ng, H. D. and Lee, J. H. S. (2014) Minimum tube diameters for steady propagation of gaseous detonations. Shock Waves, 24 (4). pp. 447-454. ISSN 0938-1287

Gao, Yuan, Lee, John H.S. and Ng, Hoi Dick (2014) Velocity fluctuation near the detonation limits. Combustion and Flame, 161 (11). pp. 2982-2990. ISSN 00102180

Imran Khan, Md., Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106, Aljarrah, Mohammad, Essadiqi, Elhachimi and Medraj, Mamoun (2014) Influence of cooling rate on microsegregation behavior of magnesium alloys. Journal of materials . ISSN 2314-4866

Mehrjoo, N., Zhang, B., Portaro, R., Ng, H. D. and Lee, J. H. S. (2014) Response of critical tube diameter phenomenon to small perturbations for gaseous detonations. Shock Waves, 24 (2). pp. 219-229. ISSN 0938-1287

Mehrjoo, Navid, Portaro, Rocco and Ng, Hoi Dick (2014) A technique for promoting detonation transmission from a confined tube into larger area for pulse detonation engine applications. Propulsion and Power Research, 3 (1). pp. 9-14. ISSN 2212540X

Mezbahul-Islam, Mohammad, Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 and Medraj, Mamoun (2014) Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data. Journal of Materials, 2014 . ISSN 2314-4866

Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 and Medraj, Mamoun (2014) Experimental Investigation of the Ce-Mg-Mn Isothermal Section at 723 K (450°C) via Diffusion Couples Technique. METALLURGICAL AND MATERIALS TRANSACTIONS A . pp. 1-17. ISSN 1543-1940

Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 and Medraj, Mamoun (2014) Phase Equilibria of the Ce-Mg-Zn Ternary System at 300 °C. Metals, 4 (2). pp. 168-195. ISSN 2075-4701

Paraschivoiu, Marius, Komeili, Martin and Zadeh, Saman Naghib (2014) MESH CONVERGENCE STUDY FOR 2-D STRAIGHT-BLADE VERTICAL AXIS WIND TURBINE SIMULATIONS AND ESTIMATION FOR 3-D SIMULATIONS. Transactions of the Canadian Society for Mechanical Engineering,, 38 (4).

Paraschivoiu, Marius and Shishehgaran, Nasim (2014) CFD BASED SIMULATION OF HYDROGEN RELEASE THROUGH ELLIPTICAL ORIFICES. International Journal of Hydrogen Energy, 39 (35). pp. 20350-20356.

Qian, Duowen, Lee, John H. S. and Ng, Hoi Dick (2014) Formation and evolution of cylindrically diverging detonation waves in gases. Physics of Fluids, 26 (9). 091103. ISSN 1070-6631

Teng, Hong Hui, Jiang, Zong Lin and Ng, Hoi Dick (2014) Numerical study on unstable surfaces of oblique detonations. Journal of Fluid Mechanics, 744 . pp. 111-128. ISSN 0022-1120

Wang, Tian, Kevorkov, Dmytro, Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 and Medraj, Mamoun (2014) Experimental Investigation of the Phase Equilibria in the Al-Mn-Zn System at 400 °C. Journal of Materials, 2014 (451587). p. 13. ISSN 2314-4866

Zhang, Bo, Mehrjoo, Navid, Ng, Hoi Dick, Lee, John H.S. and Bai, Chunhua (2014) On the dynamic detonation parameters in acetylene–oxygen mixtures with varying amount of argon dilution. Combustion and Flame, 161 (5). pp. 1390-1397. ISSN 00102180

Thesis

Abou Ziki, Jana Daher (2014) Spark Assisted Chemical Engraving: A Novel Approach for Quantifying the Machining Zone Parameters Using Drilling Forces. PhD thesis, Concordia University.

Abouobaia, Ehab Mohamed Said (2014) Hybrid Torsional Damper for Semi-Active Control of Torsional Vibrations in Rotating Machines. PhD thesis, Concordia University.

Afroosheh, Mohammadamin (2014) Large Eddy Simulation of Hydrogen Sonic Jet. Masters thesis, Concordia University.

Alem, Ali (2014) A novel method to fabricate open-cell silicon nitride foams with a high and controlled level of porosity. PhD thesis, Concordia University.

Badwal, Gurpreet Singh (2014) A Model for Turbulent Compressible Vortices. Masters thesis, Concordia University.

Bazrafshan, Majid (2014) Lagrangian Relaxation for q-Hub Arc Location Problems. Masters thesis, Concordia University.

El Ayoubi, Carole (2014) Three-Dimensional Aero-Thermal Optimization of Film Cooling in a High Pressure Turbine. PhD thesis, Concordia University.

Enderer, Furkan (2014) Integrating Dock-Door Assignment and Vehicle Routing in Cross-Docking. Masters thesis, Concordia University.

Eshita, Israt Jahan (2014) Analysis of New Multi Cellular Vortex Model. Masters thesis, Concordia University.

Ghanbari Mardasi, Mahmood (2014) Lab-On-Chip for Ex-Vivo study of morphogenesis of tip growing cells of pollen tube. PhD thesis, Concordia University.

Gharapurkar, Ajinkya A. (2014) Robust Semi-active Control of Aircraft Landing Gear System Equipped with Magnetorheological Dampers. Masters thesis, Concordia University.

Grujicic, Aleksandar (2014) Carbon Nanotube Quality Impact on Epoxy Composites Thermal Conductivity. Masters thesis, Concordia University.

Hejazi, Amir Hossein (2014) Lean engineering performance measurement model. Masters thesis, Concordia University.

Kalra, Mayank (2014) Development and Assessment of a Coupling Force Measurement System Applied to Stationary and Vibrating Tool Handles. Masters thesis, Concordia University.

Keshmiri, Mohammad (2014) Image Based Visual Servoing Using Trajectory Planning and Augmented Visual Servoing Controller. PhD thesis, Concordia University.

Kolaei, Amir (2014) Dynamic Liquid Slosh in Moving Containers. PhD thesis, Concordia University.

Komolafe, Bolarinwa (2014) A Study on the Wetting Behaviour of Ti-20Zr-20Cu-20Ni Brazing Filler on Ti-6Al-4V. Masters thesis, Concordia University.

Ma, Dina (2014) Liquid Impingement Erosion Performance of Low Plasticity Burnished Ti6Al4V. Masters thesis, Concordia University.

Maasouman, Mohammad Ali (2014) Development of Lean Maturity Model for Operational Level Planning. Masters thesis, Concordia University.

Mahvash-Mohammadi, Batoul (2014) Three-Dimensional Capacitated Vehicle Routing Problems with Loading Constraints. PhD thesis, Concordia University.

Mehrjoo, Navid (2014) Experimental Investigation on the Failure Mechanism for Critical Tube Diameter Phenomenon of Gaseous Detonations. PhD thesis, Concordia University.

Merat, Pooya (2014) SINGULARITY ANALYSIS AND WORKSPACE DETERMINATION OF PARALLEL MANIPULATORS: APPLICATIONS TO RECONFIGURABLE MANIPULATORS. Masters thesis, Concordia University.

Moghtadernejad, Sara (2014) Dynamics of Droplet Shedding and Coalescence under the Effect of Shear Flow. PhD thesis, Concordia University.

Mohajerani, Mohammadhossein (2014) Frequency-Domain System Identification for Unmanned Helicopters from Flight Data. Masters thesis, Concordia University.

Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 (2014) Experimental Investigation of the Phase Equilibria in the Mg-Mn-{Ce, Nd} and Ce-Mg-Zn Ternary Systems and Diffusivity Measurements of the Mg-{Ce, Nd, Zn} and Zn-{Ce, Nd} Binary Systems. PhD thesis, Concordia University.

Mousavi, Seyed Milad (2014) Numerical study of Effervescent atomization. Masters thesis, Concordia University.

Naghashpour, Ali (2014) In-situ damage and strain monitoring of large polymer composite structures using carbon nanotube networks. PhD thesis, Concordia University.

Rampal, Rahul (2014) The optics of Turbulent Compressible Vortices. Masters thesis, Concordia University.

Razi, Mohammad (2014) Analysis of Rotor Dynamics Acceptance Criteria in Large Industrial Rotors. Masters thesis, Concordia University.

Saberi, Soroush (2014) Numerical Model and Analysis on Performance of a Straight-Through Swirl Tube Cyclone (Inertial Gas-Solid Separator). Masters thesis, Concordia University.

Sharifi, Farid (2014) Cooperative Coverage Control of Multi-Agent Systems. PhD thesis, Concordia University.

Shojaalsadati, SeyedMohammad (2014) Torsional Vibration Attenuation in V-Type Locomotive Diesel Engine Crankshaft using Centrifugal Pendulum Absorber. Masters thesis, Concordia University.

Song, Ruibiao (2014) CAD/CAE of Blanks for Post-Machining Stretch Forming of Complex Aircraft Panels. Masters thesis, Concordia University.

Srinivasan, Ashok (2014) Integrating Block Layout Design and Location of Input and Output Points in Facility Layout Problems. Masters thesis, Concordia University.

Taheri, Siavash (2014) Steering Control Characteristics of Human Driver Coupled with an Articulated Commercial Vehicle. PhD thesis, Concordia University.

Vasheghani Farahani, Ehsan (2014) Product Development Flow: A Queueing Perspective. Masters thesis, Concordia University.

Wang, Shu (2014) Vibration Analysis of a Hand-Held Percussion Tool Coupled with the Hand-Arm System. Masters thesis, Concordia University.

Yan, Wenying (2014) Heuristics for Truck Scheduling at Cross Docking Terminals. Masters thesis, Concordia University.

You, Qian (2014) Experimental Investigation of Flow Boiling Instability in a Single Vertical Microtube:Effects of Hydraulic Diameter and Flow Orientation. Masters thesis, Concordia University.