Items where Division is "Mechanical and Industrial Engineering" and Year is 2015

A

Aghasibeig, Maniya (2015) Engineered Thermally Sprayed Electrodes for Hydrogen Production by Alkaline Water Electrolysis. PhD thesis, Concordia University.

Agudelo, Carlos G. (2015) Electrical Lab-on-a-Chip for Ex Vivo Study on the Influence of Electric Fields on Pollen Cells. PhD thesis, Concordia University.

Alemam, Abdulbaset Mohamed Elhabib (2015) Eco-Design Improvement at the Conceptual Design Stage: Methodology and Applications. PhD thesis, Concordia University.

Amirjabbari, Bahareh and Bhuiyan, Nadia (2015) An Application of a Cost Minimization Model in Determining Safety Stock Level and Location. The Global Journal of Researches in Engineering, 15 (3). pp. 43-62. ISSN 2249-4596

C

Chen, Hanshi (2015) A New Method of Modeling Flank and fillet Rake Surfaces of Fillet End-mills. Masters thesis, Concordia University.

D

Daie, Pooya (2015) Hierarchical Clustering Approach for Product Variety Management. PhD thesis, Concordia University.

Danesh Shahraki, Omid (2015) OPTIMAL LEADER-FOLLOWER FORMATION CONTROL USING DYNAMIC GAMES. Masters thesis, Concordia University.

Di Labbio, Giuseppe (2015) On the Evolution of Flows in Straight Circular Pipes subject to a Localized Transverse Impulsive Body Force. Masters thesis, Concordia University.

E

Eshaghi, Mehdi (2015) Vibration Analysis of MR Fluid Sandwich Plates and Identification of Optimal MR Fluids Treatments. PhD thesis, Concordia University.

F

Fang, Zixi (2015) Research and Application of the Cutter Geometry On-Machine Measurement Using Laser Tool Setters. Masters thesis, Concordia University.

Farazandeh, Azadeh (2015) Synthesis and Analysis of an Active Independent Front Steering (AIFS) System. PhD thesis, Concordia University.

Fellah Jahromi, Ali (2015) Modeling and Robust Control of Integrated Ride and Handling of Passenger Cars. PhD thesis, Concordia University.

G

Gao, Yuan, Ng, Hoi Dick and Lee, John H.S. (2015) Experimental characterization of galloping detonations in unstable mixtures. Combustion and Flame, 162 (6). pp. 2405-2413. ISSN 00102180

Ghayoor Karimiani, Hossein (2015) Analysis of Residual Stresses in Thermoplastic Composites Manufactured by Automated Fiber Placement. Masters thesis, Concordia University.

Ghazihesami, Rouzbeh (2015) Assessment of numerical modelling for steady state jet impingement cooling in different geometries. Masters thesis, Concordia University.

Gomaa, Hany (2015) Impact and Shedding of Microdroplets on Hydrophilic and Superhydrophobic Surfaces. PhD thesis, Concordia University.

Grewal, Harinderpal Singh (2015) Characterization of Interply Shear Behaviour of Out-of-Autoclave Thermosetting Prepreg Composites. Masters thesis, Concordia University.

Gunter, Amy-Lee (2015) Design of a Horizontal Axis Open-Centre Tidal Stream Turbine using Computational Fluid Dynamics. Masters thesis, Concordia University.

H

Hashemi, Vesra (2015) Aerospace Manufacturing-Remanufacturing System Modeling and Optimization. PhD thesis, Concordia University.

Hassan Beiglou, Ali Reza (2015) Anatomic Characterization and Profilometry of Tissues with Natural Shape: A Real-time Approach for Robotic-Assisted Minimally Invasive Surgery. Masters thesis, Concordia University.

Hassan, Mohamed (2015) Fluid Dynamic Assessment of Sensor Geometry For Micro System Applications. PhD thesis, Concordia University.

Hoang, Minh Duc (2015) Procedure for making flat thermoplastic composite plates by Automated Fiber Placement and their mechanical properties. Masters thesis, Concordia University.

K

Kamkarrad, Hossein, Narayanswamy, Sivakumar and Keshmiri, Mohammad (2015) High Repetition Laser Shock Peening on Magnesium Based Biodegradable Alloys. Journal of Laser Micro/Nanoengineering, 10 (3). pp. 291-297. ISSN 18800688

Kazerooni, Helia (2015) Mixed-Integer Programming Solution to Zone-Based Air Traffic Management Problem. Masters thesis, Concordia University.

Kiyanda, Charles B., Morgan, Graeme H., Nikiforakis, Nikolaos and Ng, Hoi Dick (2015) High resolution GPU-based flow simulation of the gaseous methane-oxygen detonation structure. Journal of Visualization, 18 (2). pp. 273-276. ISSN 1343-8875

Krishnan, Abilash (2015) CFD Based Design and Analysis of Building Mounted Wind Turbine with Diffuser Shaped Shroud. Masters thesis, Concordia University.

L

Li, Zhi (2015) Modeling and Control of Magnetostrictive-actuated Dynamic Systems. PhD thesis, Concordia University.

M

Ma, Dina, Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106, Kevorkov, Dmytro, Pavel, Jedrzejowski, Pugh, Martin and Medraj, Mamoun (2015) Water Impingement Erosion of Deep-Rolled Ti64. Metals, 5 (3). pp. 1462-1486. ISSN 2075-4701

Maamoun, Karim (2015) The Use of Financial Hedging in Supply Chain Risk Management. Masters thesis, Concordia University.

Mehrjoo, Navid, Gao, Yuan, Kiyanda, Charles Basenga, Ng, Hoi Dick and Lee, John H.S. (2015) Effects of porous walled tubes on detonation transmission into unconfined space. Proceedings of the Combustion Institute, 35 (2). pp. 1981-1987. ISSN 15407489

Meng, Zhongyao (2015) Short Production Run Control Charts to Monitor Process Variances. Masters thesis, Concordia University.

Mirzaei, Mostafa (2015) Cooperative Multi Agent Search and Coverage in Uncertain Environments. PhD thesis, Concordia University.

Mostafa, Ahmad ORCID: https://orcid.org/0000-0001-5625-1106 and Medraj, Mamoun (2015) Experimental Investigation of the Mg-Nd-Zn Isothermal Section at 300 °C. Metals, 5 (1). pp. 84-01. ISSN 2075-4701

N

Nabavizadehrafsanjani, Sima (2015) The Effect of Moisture on Electrical Resistivity of MWCNT Reinforced Epoxy Nanocomposites. Masters thesis, Concordia University.

P

Parambath Mohan, Rahul (2015) Investigation of Intra/ply Shear Behavior of Out-of-Autoclave Carbon/Epoxy Prepreg. Masters thesis, Concordia University.

Portaro, Rocco and Ng, Hoi Dick (2015) Experiments and Modeling of Air-Powered Needle-Free Liquid Injectors. Journal of Medical and Biological Engineering, 35 (5). pp. 685-695. ISSN 1609-0985

Pourang, Kourosh (2015) Effect of Substrate on In-flight Particle Characteristics in Suspension Plasma Spraying. Masters thesis, Concordia University.

R

Rezabeigi, Ehsan (2015) Development of highly porous polylactic acid-based monoliths containing sol-gel-derived 45S5 Bioglass®. PhD thesis, Concordia University.

Rodriguez, Cesar (2015) System Analysis Using Simulation for Manufacturing Gauge R&R Study. Masters thesis, Concordia University.

S

Sabzevari, Seyed Mostafa (2015) Wall Slip of Polydisperse Linear Polymer Melts. PhD thesis, Concordia University.

Sadeghzadeh, Iman (2015) Fault Tolerant Flight Control of Unmanned Aerial Vehicles. PhD thesis, Concordia University.

Saeedi, Azadeh (2015) Energetic and Hemodynamic Characteristics of Paravalvular Leak Following Transcatheter Aortic Valve Replacement. Masters thesis, Concordia University.

Samiee Daluie, Alireza (2015) Integrated Production-Distribution Planning Under Congestion and Carbon Emission Constraints. Masters thesis, Concordia University.

Sanei Bajgiran, Omid (2015) Integrated tactical planning in the lumber supply chain under demand and supply uncertainty. PhD thesis, Concordia University.

Shobeiri, Ali (2015) GRASP Metaheuristic for Multiple Allocation p-Hub Location Problem. Masters thesis, Concordia University.

Soltani Rad, Javad (2015) A Comprehensive Study on Tool Condition Monitoring Using Time-Frequency Transformation and Artificial Intelligence. Masters thesis, Concordia University.

Starr, Amanda, Lee, John H.S. and Ng, Hoi Dick (2015) Detonation limits in rough walled tubes. Proceedings of the Combustion Institute, 35 (2). pp. 1989-1996. ISSN 15407489

Subramanian, Nithya (2015) Low density triethoxysilane self-assembled monolayers and its stability under biological media. Masters thesis, Concordia University.

salimi, saba (2015) Cooperation between two suppliers and a common retailer. Masters thesis, Concordia University.

T

Teng, Honghui, Ng, Hoi Dick, Li, Kang, Luo, Changtong and Jiang, Zonglin (2015) Evolution of cellular structures on oblique detonation surfaces. Combustion and Flame, 162 (2). pp. 470-477. ISSN 00102180

W

Wang, Ruoqi (2015) A Mixed Integer Programming Model for Production Planning in Labor Intensive Manufacturing Systems. Masters thesis, Concordia University.

Wang, Tao, Zhang, Yining, Teng, Honghui, Jiang, Zonglin and Ng, Hoi Dick (2015) Numerical study of oblique detonation wave initiation in a stoichiometric hydrogen-air mixture. Physics of Fluids, 27 (9). 096101. ISSN 1070-6631

Weraikat, Dua (2015) Coordination Mechanisms for Sustainable Supply Chain Management in Pharmaceutical Industry. PhD thesis, Concordia University.

Z

Zhang, Bo and Ng, Hoi Dick (2015) Explosion behavior of methane–dimethyl ether/air mixtures. Fuel, 157 . pp. 56-63. ISSN 00162361

Zhang, Xin (2015) Experimental Investigation of the Ternary Mg-Zn-Zr System. Masters thesis, Concordia University.

Zhou, Yuansheng (2015) Five-axis Flank Milling and Modeling the Spiral Bevel Gear with a Ruled Tooth Surface Design. PhD thesis, Concordia University.