Breadcrumb

 
 

Items where Division is "Concordia University > Faculty of Engineering and Computer Science > Mechanical and Industrial Engineering" and Year is 2011

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Authors | Item Type | No Grouping
Jump to: Article | Thesis
Number of items: 60.

Article

Ait Abderrahmane, H. and Paidoussis, M. and Fayed, M. and Ng, Hoi Dick (2011) Flapping dynamics of a flexible filament. Physical Review E, 84 (6). ISSN 1539-3755

Cao, Dongpu and Rakheja, Subhash and Sandu, Corina (2011) Special issue on interdisciplinary aspects of vehicle system dynamics integration. Mechanical Systems and Signal Processing, 25 (8). pp. 3213-3215. ISSN 08883270

Cree, D. and Pugh, Martin (2011) Dry wear and friction properties of an A356/SiC foam interpenetrating phase composite. Wear, 272 (1). pp. 88-96. ISSN 00431648

Fayed, Mohamed and Portaro, Rocco and Gunter, Amy-Lee and Abderrahmane, Hamid Ait and Ng, Hoi Dick (2011) Visualization of flow patterns past various objects in two-dimensional flow using soap film. Physics of Fluids, 23 (9). 091104. ISSN 10706631

Gunter, Amy-Lee and Smadi, Othman and Kadem, Lyes and Ng, Hoi Dick (2011) Visualization of an imploding circular wave front and the formation of a central vertical jet. Journal of Visualization, 14 (1). pp. 19-22. ISSN 1343-8875

Haque, Mohammad Rafiqul and Fayed, Mohamed and Gunter, Amy-Lee and Smadi, Othman and Kadem, Lyes and Ng, Hoi Dick (2011) Numerical simulation and flow visualization using soap film of the self-organized vortex structure in the wake of an array of cylinders. Journal of Visualization, 14 (4). pp. 311-314. ISSN 1343-8875

Kalantari, Masoud and Ramezanifard, Mohammadreza and Ahmadi, Roozbeh and Dargahi, Javad and Kövecses, József (2011) A piezoresistive tactile sensor for tissue characterization during catheter-based cardiac surgery. The International Journal of Medical Robotics and Computer Assisted Surgery, 7 (4). pp. 431-440. ISSN 14785951

Mandapuram, Santosh and Rakheja, Subhash and Marcotte, Pierre and Boileau, Paul-Émile (2011) Analyses of biodynamic responses of seated occupants to uncorrelated fore-aft and vertical whole-body vibration. Journal of Sound and Vibration, 330 (16). pp. 4064-4079. ISSN 0022460X

Mohiuddin, Mohammad and Van Hoa, Suong (2011) Electrical resistance of CNT-PEEK composites under compression at different temperatures. Nanoscale Research Letters, 6 (1). p. 419. ISSN 1556-276X

Pazooki, Alireza and Cao, Dongpu and Rakheja, Subhash and Boileau, Paul-Émile (2011) Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension. Vehicle System Dynamics, 49 (9). pp. 1455-1476. ISSN 0042-3114

Pazooki, Alireza and Rakheja, Subhash and Cao, Dongpu (2011) Modeling and validation of off-road vehicle ride dynamics. Mechanical Systems and Signal Processing . ISSN 08883270

Rajamohan, Vasudevan and Sedaghati, Ramin and Rakheja, Subhash (2011) Optimal vibration control of beams with total and partial MR-fluid treatments. Smart Materials and Structures, 20 (11). p. 115016. ISSN 0964-1726

Zhang, Yi-Nan and Kevorkov, Dmytro and Bridier, Florent and Medraj, Mamoun (2011) Experimental study of the Ca–Mg–Zn system using diffusion couples and key alloys. Science and Technology of Advanced Materials, 12 (2). 025003. ISSN 1468-6996

Thesis

Abedinpour Fallah, Mehdi (2011) Optimal Control and Estimation Strategies for Nonlinear and Switched Systems. Masters thesis, Concordia University.

AbrishamiShirazi, Pegah (2011) Solving Manufacturing-Remanufacturing System Production Planning Problems Using Lagrangian Relaxation. Masters thesis, Concordia University.

Allagui, Anis (2011) On the Electrochemical Discharges for Nanoparticles Synthesis. PhD thesis, Concordia University.

Amini-Baziani, Ghobad (2011) Instability of Elliptic Liquid Jets. PhD thesis, Concordia University.

Amirjabbari, Bahareh (2011) An Application of a Cost Minimization Model in Determining Safety Stock Level and Location. Masters thesis, Concordia University.

Anthony, Tony (2011) Design of a microfluidic chip for three dimensional hydrodynamic focusing in cell cytometry applications. Masters thesis, Concordia University.

Arzpeyma, Gilnaz (2011) Application of Engel-Brewer and Miedema Semi-Empirical Models Combined with Entropy Models to Thermodynamic Modeling of Binary Systems. Masters thesis, Concordia University.

Aurup, Golam Mohammad Moshiuddin (2011) User Preference Extraction from Bio-Signals: An Experimental Study. Masters thesis, Concordia University.

Chandrasekaran, Arvind (2011) Cavitation Assisted and Enhanced Valveless Micropumping Integrated Optical Detection based Micro-Total Analysis System (mTAS): Design, Modeling, Fabrication and Testing. PhD thesis, Concordia University.

Changizi, M.Amin (2011) Geometry and Material Nonlinearity Effects on Static and Dynamics Performance of MEMS. PhD thesis, Concordia University.

Dasgupta, Abhijit (2011) Effect of Tank Cross-Section and Longitudinal Baffles on Transient Liquid Slosh in Partly-Filled Road Tankers. Masters thesis, Concordia University.

Du, Chun (2011) CAD of Solid Carbide End-Mills and its Applications. Masters thesis, Concordia University.

Esakki, Balasubramanian (2011) Modeling and Robust Control of Two Collaborative Robot Manipulators Handling a Flexibile Object. PhD thesis, Concordia University.

Eslami, Hamidreza (2011) Effect of collaboration network structure on knowledge and innovation productivity: The case of biotechnology in Canada. Masters thesis, Concordia University.

Grewal, Jasrobin Singh (2011) Vibration and Thermal Analysis and Optimum Design of Viscoelastic Sandwich Beam. Masters thesis, Concordia University.

Hadadian, Armin (2011) Optimal Design of Magnetorheological Dampers Constrained in a Specific Volume Using Response Surface Method. Masters thesis, Concordia University.

KHAN, SALMAN (2011) THERMAL CONTROL SYSTEM DESIGN FOR AUTOMATED FIBER PLACEMENT PROCESS. Masters thesis, Concordia University.

Kabir, Abu Syed Humaun (2011) Nd:YAG Laser Welding of Ti-6Al-4V Alloy. Masters thesis, Concordia University.

Kamal, Mohammad (2011) Reflective optics-based line-scanning spectral domain optical coherence tomography system. PhD thesis, Concordia University.

Kassem, Sally S. (2011) Integrated Forward and Reverse Logistics Network Design. PhD thesis, Concordia University.

Keshavarz-Motamed, Zahra (2011) Flow Dynamics in Human Aorta with Coexisting Models of Bicuspid Aortic Stenosis and Coarctation of the Aorta. PhD thesis, Concordia University.

Khaksarfard, Reza (2011) Numerical Investigation of Hydrogen Sonic Jet With Real Gas Model. PhD thesis, Concordia University.

Khataie, Amir H. (2011) Activity-Based Costing in Supply Chain Cost Management Decision Support Systems. PhD thesis, Concordia University.

Khattab, Ahmed/ Abd ElRahman (2011) Investigation of an Adaptable Crash Energy Management System to Enhance Vehicle Crashworthiness. PhD thesis, Concordia University.

Koraitem, Khalid (2011) Characterization of Conical and Elliptical Fuel Spray Nozzles using Non-Intrusive Laser Diagnostic Methods. Masters thesis, Concordia University.

Li, Haoming (2011) The Counter-Rotating Vortex Pair in Film-Cooling Flow and its Effect on Cooling Effectiveness. Masters thesis, Concordia University.

Li, Tong (2011) Nonlinear and Fault-tolerant Control Techniques for a Quadrotor Unmanned Aerial Vehicle. Masters thesis, Concordia University.

Ma, Ling (2011) Development of Fault Detection and Diagnosis Techniques with Applications to Fixed-wing and Rotary-wing UAVs. Masters thesis, Concordia University.

Mactabi, Roham (2011) In Situ Health Monitoring of Adhesively Bonded Joints during Fatigue Using Carbon Nanotube Network. Masters thesis, Concordia University.

Madakashira-Pranesh, Anand (2011) Experimental and Analytical study of Transmission of Whole-body Vibration to Segments of the Seated Human Body. PhD thesis, Concordia University.

Megahed, Ayman (2011) Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays. PhD thesis, Concordia University.

Najafi Marzbali, Seyedmohsen (2011) Penetration of Circular and Elliptical Liquid Jets into Gaseous Crossflow: A Combined Theoretical and Numerical Study. Masters thesis, Concordia University.

Naseri, Arash (2011) Interface Pressure and Vibration Comfort Evaluations of an Air-Cushion Suspension Seat. Masters thesis, Concordia University.

Osman, Hany (2011) Supply Chain Reconfiguration and Inventory Integration in a Stochastic Environment. PhD thesis, Concordia University.

Rababah, Mahmoud (2011) A Practical and Optimal Approach to CNC Programming for Five-Axis Grinding of the End-Mill Flutes. PhD thesis, Concordia University.

Shahparnia, Mehdi (2011) Polymer Micro Photosynthetic Power Cell: Design, Fabrication, Parametric Study and Testing. Masters thesis, Concordia University.

Shahriari, Shahrokh (2011) Computational Modeling of Cardiovascular Flows using Smoothed Particle Hydrodynamics. PhD thesis, Concordia University.

Shamekh, Mohammed (2011) Processing and Characterization of Mg Matrix Composites Reinforced with TiC and TiB2 Phases using an In-situ Reactive Infiltration Technique. PhD thesis, Concordia University.

Sivashanmugam, Vadivel Kumaran (2011) Three dimensional Aero-Structural Shape Optimization of Turbomachinery Blades. Masters thesis, Concordia University.

Smadi, Othman Ahmed (2011) Numerical and Experimental Investigations of Pulsatile Blood Flow through a Dysfunctional Mechanical Heart Valve. PhD thesis, Concordia University.

Tayaran, Elham/ET (2011) Investigation of the Critical Factors in the Early Stage of the Innovation Process in Biotechnology: A System Dynamics Approach. Masters thesis, Concordia University.

Teixeira, Alexandre (2011) Development of an Electropolishing Method for Titanium Materials. Masters thesis, Concordia University.

Yi, Jie (2011) Residual Stress and Distortion Measurements on Induction Hardened AISI 4340 Discs. Masters thesis, Concordia University.

Yuryev, Yury (2011) Nucleation and crystallization of poly(lactic acid). PhD thesis, Concordia University.

ZHU, Jiang (2011) Machining Feature Based Geometric Modeling of Twist Drills. Masters thesis, Concordia University.

Zamal, Hasna Hena (2011) Monitoring Fatigue Damage Behavior of Glass/Epoxy Composites Using Carbon Nanotubes as Sensors. Masters thesis, Concordia University.

Zhang, Yinan (2011) Experimental investigation of the Ca-Mg-Zn system via Diffusion Couples and Key Experiments. Masters thesis, Concordia University.

This list was generated on Sat Jul 26 03:04:53 2014 EDT.

Concordia University - Footer