Items where Division is "Building, Civil and Environmental Engineering" and Year is 2020

Abdelkader, Eslam Mohammed (2020) An Integrated Method for Optimizing Bridge Maintenance Plans. PhD thesis, Concordia University.

Ahadzadeh Ghanad, Diba (2020) Implementation of Agriculture Wastes in Different Construction Applications. Masters thesis, Concordia University.

Akbarzadeh, Mohammad (2020) Enhancing Safety on Construction Sites by Detecting Personal Protective Equipment and Localizing Workers Using Computer Vision Techniques. Masters thesis, Concordia University.

Al-Sakkaf, Abobakr ORCID: https://orcid.org/0000-0002-1072-5895 (2020) Sustainability Assessment of Heritage Buildings. PhD thesis, Concordia University.

Alaghbandrad, Ali (2020) Economic Analysis and Information Modeling of Smart Multi-purpose Utility Tunnels. PhD thesis, Concordia University.

Aldoum, Murad and Stathopoulos, Ted (2020) Wind loads on low-slope roofs of buildings with large plan dimensions. Engineering Structures, 225 (111298).

Almakhadmeh, Mohammad (2020) ALKALI ACTIVATED MATERIALS: INTERACTIONS BETWEEN INGREDIENTS TO ACHIEVE SUSTAINABILITY. Masters thesis, Concordia University.

Alrawashdeh, Hatem and Stathopoulos, Ted (2020) Wind loads on solar panels mounted on flat roofs: Effect of geometric scale. Journal of Wind Engineering and Industrial Aerodynamics, 206 . pp. 1-14. ISSN 0167-6105

Amer, Amr (2020) Automated segmentation and reconstruction of structural elements for indoor multi-level room environment. Masters thesis, Concordia University.

Assad, Ahmed ORCID: https://orcid.org/0000-0002-7363-6646 (2020) Resilience-Driven Management of Water Distribution Networks. PhD thesis, Concordia University.

Baradaran-Noveiri, Pouya (2020) A BIM-Based Approach for Optimizing HVAC Design and Air Distribution System Layouts in Panelized Houses. Masters thesis, Concordia University.

Chan, Ei Ei (2020) Analysis of Construction Dispute Cases in Canadian Courts and Lessons Learned for Modular and Off-site Construction Contracts. Masters thesis, Concordia University.

Chen, Wenxue (2020) Structural Response of Multi-Story Buildings Subjected to Foundation Differential Settlements. PhD thesis, Concordia University.

Chen, Zhikun (2020) Green Surface-washing Agent and Oily Waste Management for Oil Spill Response. Masters thesis, Concordia University.

Dalia, Zannatul Mawa (2020) Local Buckling of Steel Multi-Sided Tube Sections. Masters thesis, Concordia University.

Delir Jafarzadehazar, Siamak (2020) Shell Analysis of Steel Frames Considering Low-cycle Fatigue within the Continuum-Damage-Plasticity Framework. Masters thesis, Concordia University.

Dermardiros, Vasken (2020) Data-Driven Optimized Operation of Buildings with Intermittent Renewables and Application to a Net-Zero Energy Library. PhD thesis, Concordia University.

Desbrousses, Romaric Léo Esteban ORCID: https://orcid.org/0000-0001-5350-6812 (2020) Enhancing Building Resistance to Differential Settlement with Canadian Seismic Design Provisions. Masters thesis, Concordia University.

Dong, Jinxin (2020) Development of a Regional-Scale Numerical Environmental Multimedia Modeling (RNEMM) Approach to Assess Spatial Eco-Environmental Exposure Risk of Contaminants. PhD thesis, Concordia University.

Elkabalawy, Moaaz ORCID: https://orcid.org/0000-0001-6654-2281 (2020) Optimized Resource-Constrained Method for Project Schedule Compression. Masters thesis, Concordia University.

Farahbakhshtooli, Armin (2020) Collapse Assessment of Steel Plate Shear Walls. PhD thesis, Concordia University.

Fazeli, Sasan (2020) Development of UVC advanced oxidation photolysis combined with membrane electro- bioreactor for simultaneous removal for emerging contaminants and reduction of by-products. PhD thesis, Concordia University.

Ghazi Sharyatpanahi, Nozhat Sadat (2020) Seismic Performance of Steel Shear Walls with Rectangular Openings. Masters thesis, Concordia University.

Ghobad Pour, Seyed Reza (2020) A Linkage between Travel Demand Models and Road Management Systems. Masters thesis, Concordia University.

Golkhoo, Farzaneh (2020) Material Management Framework utilizing Near Real-Time Monitoring of Construction Operations. PhD thesis, Concordia University.

Gu, FangFang (2020) Modeling and Simulation of Mudflows Impacting Railway Infrastructure Using Smoothed Particle Hydrodynamics. Masters thesis, Concordia University.

Guerrero López, Cristóbal (2020) Self-Adaptive Model-Based Control for VAV Systems. Masters thesis, Concordia University.

Hadavi, Shiva (2020) Predicting activity noise levels in occupied classrooms by means of cluster analysis. Masters thesis, Concordia University.

Hebiba, AlaaEldin ORCID: https://orcid.org/0000-0003-0353-5513 (2020) Wind-Wise Automated Decision Support Tool for Tower Crane type selection and location. Masters thesis, Concordia University.

Heidari, Mehdi (2020) Reducing the risk for water biota by adsorption of pharmaceuticals and heavy metals using a fixed-bed column with a novel biochar. Masters thesis, Concordia University.

Higgins, Stéphanie (2020) Application of Artificial Intelligence on Design Strategies to Optimize Urban Wind Energy. Masters thesis, Concordia University.

Hosseini Rahdar, Mohammad ORCID: https://orcid.org/0000-0002-0293-2296 (2020) A Bayesian Approach to The Assessment of Fuel Composition Variability Effects on Grate-bed Biomass Combustion. PhD thesis, Concordia University.

Hosseinzadeh, Shadman (2020) Seismic Fragility Assessment and Resilience of Reinforced Masonry Shear Wall Systems. PhD thesis, Concordia University.

Huang, Yusheng (2020) Providing Proximity Safety and Speeding Alerts to Workers on Construction Sites Using Bluetooth Low Energy RTLS. Masters thesis, Concordia University.

Iravani, Rezvan (2020) Experimental and Modeling Studies of the Effects of Nanoclay on the Oil Behaviors in A Water-Sand System. Masters thesis, Concordia University.

Javadian, Sahar (2020) Application of machine learning and deep learning methods for load prediction in institutional buildings. Masters thesis, Concordia University.

Karimipourfard, Golnoosh (2020) Development of Resuspension Technique for On-site Phosphorus Remediation of Eutrophic Lakes. Masters thesis, Concordia University.

Kheshtgar Darvazeh, Salar ORCID: https://orcid.org/0000-0002-4903-4821 (2020) 3-D simulation of suppressed vortex shedding from bridge pier at high Reynolds number using attached splitter plate. Masters thesis, Concordia University.

Kochukrishnan, Aneesh (2020) Assessment of the impact of climate change on Fraser River low flows. Masters thesis, Concordia University.

Kodippili, Dulani P. A. (2020) Sol-gel derived nano-silica suspensions for inclusion in cement paste. PhD thesis, Concordia University.

Mahato, Prativa ORCID: https://orcid.org/0000-0002-0924-0874 (2020) Two-Stage (Liquid-Solid) Anaerobic Digestion of High Solid/High Ammonia rich Manures at a Low Temperature adopting Recirculation- Percolation Operational Mode. Masters thesis, Concordia University.

Mashayekh, Shamim (2020) Study of Smoke Control in High-rise Buildings and Safe Evacuation of the Occupants. Masters thesis, Concordia University.

Meertens, Wesley ORCID: https://orcid.org/0000-0002-9233-8249 (2020) Wastewater Treatment using a Novel Combined Electro-Oxidation, Electro-Coagulation, and Electro-Filtration Process. Masters thesis, Concordia University.

Mohammadjavad, Arabpour Roghabadi ORCID: https://orcid.org/0000-0002-3924-8375 (2020) Risk-based Framework for Management of Construction Projects. PhD thesis, Concordia University.

Moradi, Saeed ORCID: https://orcid.org/0000-0003-4982-3000 (2020) Defect Detection and Classification in Sewer Pipeline Inspection Videos Using Deep Neural Networks. PhD thesis, Concordia University.

Motevali, Nazanin (2020) Investigating centrifuging conditions for sustainable recovery of fuel from oily sludge. Masters thesis, Concordia University.

Mukhtarli, Kanan (2020) Machine learning for homogeneous grouping of pavements. Masters thesis, Concordia University.

Nibandhe, Aditya (2020) Simulation-based Design Methodology for a Solar assisted Solid Desiccant Cooling System in Hot and Humid Climates. Masters thesis, Concordia University.

Ohira, Masaaki (2020) Effects of Connections Detailing and Friction Dissipation Devices on the Seismic Response of a Hospital Steel Braced Frame Building. Masters thesis, Concordia University.

Orenga Panizza, Rafaela (2020) Correlation and sensitivity of building economy and energy consumption to design parameters. Masters thesis, Concordia University.

Pashaei Farahani, Shadnoush (2020) Assessment of Urban Greenhouse Gas Emission Inventory in Montréal. Masters thesis, Concordia University.

Ranjbar, Sara (2020) Novel Electro-Integrated Fixed-film Activated Sludge reactor (EIFAS) to enhance nutrients removal from wastewater. Masters thesis, Concordia University.

Raznahan, Mohammadmehdi (2020) Numerical Simulation of the Nearshore Oil Behaviors Based on Computational Fluid Dynamics. Masters thesis, Concordia University.

Saberi Derakhtenjani, Ali (2020) A Methodology for Modeling of Hydronic Radiant Slab Heating Systems for Predictive Control and Energy Flexibility. PhD thesis, Concordia University.

Sakib, Faruk Ahmed (2020) Wind load on canopies attached to buildings of different heights. Masters thesis, Concordia University.

Sharif Arani, Seyed Amirhosain (2020) Optimizing energy performance of building renovation using traditional and machine learning approaches. PhD thesis, Concordia University.

Shayegan, Zahra (2020) Modification of Titanium Dioxide for Photocatalytic Degradation of Indoor Volatile Organic Compounds: Under UV and Visible Light. PhD thesis, Concordia University.

Stathopoulos, Ted and Alrawashdeh, Hatem (2020) Wind loads on buildings: A code of practice perspective. Journal of Wind Engineering and Industrial Aerodynamics, 206 . pp. 1-14. ISSN 0167-6105

Su, Hongyu (2020) Effect of Soft Ground Tunneling-Induced Displacements on Railway Embankments. Masters thesis, Concordia University.

Taslimi Taleghani, Setareh (2020) The Novel Reactor Design and Operating Conditions for Sustainable Electrokinetic Recovery of Oil and Water from Oily Sludge. Masters thesis, Concordia University.

Vahabisani, Azar (2020) Exploring the Effects of Microalgal Biomass on the Oil Behavior in A Sand-Water System. Masters thesis, Concordia University.

Zaalouk, Ahmed (2020) A Parameterized Design Optimization Framework for Worker-Friendly Workplaces in Modular Construction. Masters thesis, Concordia University.

Zakikhani, Kimiya (2020) Failure prediction and availability-based maintenance planning of gas transmission pipelines. PhD thesis, Concordia University.

Zegen Reich, Ben ORCID: https://orcid.org/0000-0003-1192-499X (2020) Effect of Vapor Diffusion Port on the Hygrothermal Performance of Wood-Frame Walls. Masters thesis, Concordia University.

Zojaji, Pourya (2020) Production of micro-mesoporous alternative carbonaceous adsorbents for high-efficiency sorption of the emerging organic micropollutants from wastewater effluent. Masters thesis, Concordia University.

kariminezhad, esmaeel (2020) Electrokinetic-Induced Phase Separation of Petroleum Wastes: Evaluation of Oil Sediment Behavior and Solids Properties. PhD thesis, Concordia University.

obeid, yara (2020) Earth Pressure on Walls Retaining Overconsolidated Collapsible Soils Subjected to Partial. Masters thesis, Concordia University.