Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2017

A

Ait Abderrahmane, Hamid, Fayed, Mohamed and Ng, Hoi Dick (2017) Flow visualization and numerical simulation of a two-dimensional fluid flow over a foil. Journal of Visualization, 20 . pp. 687-693.

Ait Abderrahmane, Hamid, Fayed, Mohamed, Ng, Hoi Dick and Vatistas, Georgios H. (2017) The effect of viscosity on the rotating waves and polygonal patterns within a hollow vortex core. Experimental Thermal and Fluid Science, 87 . pp. 104-108. ISSN 0894-1777

Alshahrani, Hassan Abdullah (2017) Bending Behavior of Textile Thermosetting Composite Prepregs during Forming Processes. PhD thesis, Concordia University.

Attarzadeh Niaki, Seyed Mohammad Reza (2017) Numerical Study of Cloud-Sized Droplet Impact and Freezing on Superhydrophobic Surfaces. PhD thesis, Concordia University.

B

Beaudet, Daniel, Badilescu, Simona, Kuruvinashetti, Kiran, Sohrabi Kashani, Ahmad, Jaunky, Dilan, Ouellette, Sylvie, Piekny, Alisa J and Packirisamy, Muthukumaran ORCID: https://orcid.org/0000-0002-1769-6986 (2017) Comparative study on cellular entry of incinerated ancient gold particles (Swarna Bhasma) and chemically synthesized gold particles. Scientific Reports, 7 (10678). pp. 1-12. ISSN 2045-2322

C

Caio, Fernanda (2017) Study of the Influence of Substrate Shape and Roughness on Coating Microstructure in Suspension Plasma Spray. Masters thesis, Concordia University.

Contreras, Ivan ORCID: https://orcid.org/0000-0002-0235-8108, Armando Zetina, Carlos, Fernández, Elena and Luna-Mota, Carlos (2017) Solving the Optimum Communication Spanning Tree Problem. European Journal of Operational Research . ISSN 03772217 (In Press)

D

Deng, Dongping, Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 and Chen, Yong (2017) 4D Printing: Design and Fabrication of Smooth Curved Surface Using Controlled Self-Folding. Journal Of Mechanical Design, 139 (8). 081702.

Dilimulati, Aierken (2017) Augmenting Urban Wind Energy: Shrouded Diffuser Casing for Roof-mounted Wind Turbines. Masters thesis, Concordia University.

E

Elnashar, Gamaleddine A. M. ORCID: https://orcid.org/0000-0003-3868-9168 (2017) Modeling and Analysis of Pavement-Vehicle Interaction Dynamics for Pavement Distress Prediction. PhD thesis, Concordia University.

Elsherbini, Yasser Mahmoud Sami Abdelsamea (2017) Fatigue behavior of carbon/epoxy AFP laminates containing gaps. PhD thesis, Concordia University.

el-sayegh, batoul (2017) Investigation of Left Ventricle Flow Dynamics in the Presence of Mitral Annular Calcification. Masters thesis, Concordia University.

F

Fang, Yishen, Hu, Zongmin, Teng, Honghui, Jiang, Zonglin and Ng, Hoi Dick (2017) Numerical study of inflow equivalence ratio inhomogeneity on oblique detonation formation in hydrogen-air mixtures. Aerospace Science and Technology . ISSN 12709638 (In Press)

H

Hedayati Nasab, Siavash ORCID: https://orcid.org/0000-0002-0011-5161 (2017) Free Falling of Spheres in a Quiescent Fluid. Masters thesis, Concordia University.

Hemmatian, Masoud (2017) Sound Transmission Analysis of Circular Sandwich Panels Fully and Partially Treated with MR Fluid Core Layer. PhD thesis, Concordia University.

Hu, Qinglei, Meng, Yao, Wang, Chenliang and Zhang, Youmin (2017) Adaptive Backstepping Control for Air-Breathing Hypersonic Vehicles with Input Nonlinearities. Aerospace Science and Technology . pp. 1-27. ISSN 12709638 (In Press)

Huang, Jida and Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 (2017) V4PCS: Volumetric 4PCS Algorithm for Global Registration. Journal Of Mechanical Design, 139 (11). p. 111403.

K

Khalilzadeh, Ali (2017) Numerical Parametric Study of Wind-Driven Rain and Overhang Effectiveness on a Mid-Rise Building. Masters thesis, Concordia University.

Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 and Chen, Yong (2017) GDFE: Geometry-Driven Finite Element for Four-Dimensional Printing. Journal Of Manufacturing Science And Engineering, 139 (11). p. 111006.

L

Laroche, Alexandre ORCID: https://orcid.org/0000-0002-7041-7181 (2017) Comparative Evaluation of Embedded Heating Elements as Electrothermal Ice Protection Systems for Composite Structures. Masters thesis, Concordia University.

Li, Peng, Yu, Xiang, Zhang, Youmin and Peng, Xiaoyan (2017) Adaptive Multivariable Integral TSMC of a Hypersonic Gliding Vehicle with Actuator Faults and Model Uncertainties. IEEE/ASME Transactions on Mechatronics . pp. 1-10. ISSN 1083-4435 (In Press)

M

Mamani, Sara (2017) Residual Stresses in Thick Thermoset Composite Laminates due to Manufacturing Process. Masters thesis, Concordia University.

Marzbali, Mason (2017) Numerical Analysis of High-speed Droplet Impingement on Elastic and Rigid Substrates. PhD thesis, Concordia University.

McLean, Daniel (2017) Development of the Dual-Vertical-Axis Wind Turbine with Active Blade Pitch Control. Masters thesis, Concordia University.

Mi, Xiaocheng, Higgins, Andrew J., Ng, Hoi Dick, Kiyanda, Charles Basenga and Nikiforakis, Nikos (2017) Propagation of gaseous detonation waves in a spatially inhomogeneous reactive medium. Physical Review Fluids, 2 (053201). ISSN 2469-990X

Minchala, Luis I., Zhang, Youmin and Garza-Castañón, Luis E. (2017) Predictive Control of a Closed Grinding Circuit System in Cement Industry. IEEE Transactions on Industrial Electronics . pp. 1-9. ISSN 1557-9948 (In Press)

Moslemi, Zoheir (2017) High efficiency dynamic pressure based flow measurement. Masters thesis, Concordia University.

Mu, Lingxia, Yu, Xiang, Zhang, Youmin, Li, Ping and Wang, Xinmin (2017) Onboard guidance system design for reusable launch vehicles in the terminal area energy management phase. Acta Astronautica . ISSN 00945765 (In Press)

O

Ortiz-Astorquiza, Camilo ORCID: https://orcid.org/0000-0002-5540-7786, Contreras, Ivan ORCID: https://orcid.org/0000-0002-0235-8108 and Laporte, Gilbert (2017) Multi-level Facility Location Problems. European Journal of Operational Research . ISSN 03772217 (In Press)

R

Rezaei, Hamidreza (2017) Modelling and Solving Decentralized and Dynamic Aircraft Landing Scheduling Problems. Masters thesis, Concordia University.

Rouhi, Mohammad, Ghayoor, Hossein, Fortin-Simpson, Jeffrey, Zacchia, Tom T., Hoa, Suong V. and Hojjati, Mehdi (2017) Design, Manufacturing, and Testing of a Variable Stiffness Composite Cylinder. Composite Structures . ISSN 02638223 (In Press)

S

SadAbadi, Hamid and Packirisamy, Muthukumaran ORCID: https://orcid.org/0000-0002-1769-6986 (2017) Nano-Integrated Suspended Polymeric Microfluidics (SPMF) Platform for Ultra-Sensitive Bio-Molecular Recognition of Bovine Growth Hormones. Scientific Reports, 7 (1). ISSN 2045-2322

Sadeghifar, Morteza (2017) Development of the Analysis and Optimization Strategies for Prediction of Residual Stresses Induced by Turning Processes. PhD thesis, Concordia University.

Salari, Meysam (2017) Optimizing Sustainable Product Development. PhD thesis, Concordia University.

Saleh, Muftah (2017) Analysis, Design Optimization, and Semi-Active Control of Skid Landing Gear Featuring Bi-Fold Magnetorheological Dampers. PhD thesis, Concordia University.

Sharifi, Navid, Ettouil, Fadhel Ben, Moreau, Christian, Dolatabadi, Ali and Pugh, Martin (2017) Engineering surface texture and hierarchical morphology of suspension plasma sprayed TiO 2 coatings to control wetting behavior and superhydrophobic properties. Surface and Coatings Technology . ISSN 02578972 (In Press)

Shetabivash, H. and Dolatabadi, Ali ORCID: https://orcid.org/0000-0001-6416-351X (2017) Numerical investigation of air mediated droplet bouncing on flat surfaces. AIP Advances, 7 (9). 095003. ISSN 2158-3226

T

Teng, Honghui, Ng, Hoi Dick and Jiang, Zonglin (2017) Initiation characteristics of wedge-induced oblique detonation wave in a stoichiometric hydrogen-air mixture. Proceedings of the Combustion Institute, 36 . pp. 2735-2742. ISSN 1540-7489

W

Wang, Ben and Zhang, Youmin (2017) An Adaptive Fault-Tolerant Sliding Mode Control Allocation Scheme for Multirotor Helicopter Subject to Simultaneous Actuator Faults. IEEE Transactions on Industrial Electronics . pp. 1-10. ISSN 1557-9948 (In Press)

X

Xu, Gang, Kwok, Tsz Ho ORCID: https://orcid.org/0000-0001-7240-1426 and Wang, Charlie C.L. (2017) Isogeometric Computation Reuse Method for Complex Objects with Topology-Consistent Volumetric Parameterization. Computer-Aided Design, 91 . pp. 1-13.

Y

Yang, Pengfei, Ng, Hoi Dick, Teng, Honghui and Jiang, Zonglin (2017) Initiation structure of oblique detonation waves behind conical shocks. Physics of Fluids, 29 (086104).

Yin, Yuming (2017) Enhancement of Ride and Directional Performances of Articulated Vehicles via Optimal Frame Steering and Hydro-Pneumatic Suspension. PhD thesis, Concordia University.

Yu, Xiang, Fu, Yu, Li, Peng and Zhang, Youmin (2017) Fault-Tolerant Aircraft Control Based on Self-Constructing Fuzzy Neural Networks and Multivariable SMC under Actuator Faults. IEEE Transactions on Fuzzy Systems . pp. 1-11. ISSN 1063-6706 (In Press)

Yu, Xiang, Li, Peng and Zhang, Youmin (2017) The Design of Fixed-Time Observer and Finite-Time Fault-Tolerant Control for Hypersonic Gliding Vehicles. IEEE Transactions on Industrial Electronics . pp. 1-10. ISSN 1557-9948 (In Press)

Z

Zahedi, Seyed Ehsan (2017) Towards Skill Transfer via Learning-Based Guidance in Human-Robot Interaction. PhD thesis, Concordia University.

Zhang, Xiaoming (2017) Modeling and Control of the Cooperative Automated Fiber Placement System. PhD thesis, Concordia University.